Originally posted by Adrianli
View Post
Announcement
Collapse
No announcement yet.
need mod help on my EP Apro boat
Collapse
X
-
hi,
1st
can i mount the heatsink on the esc like this? i need to heatstrink it?
2nd
can i mount the esc above the motor as i prefer the CG to be mid or abit forward to the hull.
3rd
can i mount the batt sideways as if parallel the boat will roll sideway
thx alot
Mugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
-
Originally posted by superek4 View Posthi,
1st
can i mount the heatsink on the esc like this? i need to heatstrink it?
2nd
can i mount the esc above the motor as i prefer the CG to be mid or abit forward to the hull.
3rd
can i mount the batt sideways as if parallel the boat will roll sideway
thx alot
The term should be perpendicular.
Comment
-
can i place this way? will the rear of the boat be too heavy?
how do i cool my esc all the tubes has been use up? can i use a adapter? is there one u guys use?
usually do u guys set the esc soft , normal or very soft start for boat?
n whats Governor mode?
what kind of timing u guys set for medusa motor? low, middel or high?
do u have a pix how do i put the thrust bearing for the motor?
Mugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
-
Originally posted by superek4 View Postcan i place this way? will the rear of the boat be too heavy?
U can place it any way u like, just make sure the CG is 33% from transom.
how do i cool my esc all the tubes has been use up? can i use a adapter? is there one u guys use?
U can go to aquarium shop and get air tube for 20cents or 30 cents a meter. They sell different connectors there also.
usually do u guys set the esc soft , normal or very soft start for boat?
Soft start will do.
n whats Governor mode?
Governor is for heli use only.
what kind of timing u guys set for medusa motor? low, middel or high?
Medusa is a 4 pole motor, use low timing.
do u have a pix how do i put the thrust bearing for the motor?
Picture attached of mine.
Comment
-
thx alot, I appre it.
Btw do u guys build flood chamber for ur boat? I was told by Jan at Rc group to build one but it looks difficult.
Wo the chamber the boat shld b ready by this week testing at bishan parkMugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
-
hi, i hv fixed some new tubes on the esc but it seems that the tube is abit too soft izzit ok?
will the tube be too soft for the water pressure?
n i only hv one pickup point
Mugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
-
Originally posted by Adrianli View PostThere should not be kinks in ur water tubes. Make them longer. Otherwise get those more expensive fuel tubings.
U can run the cooling from water pickup -> motor -> ESC -> water outlet.Mugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
-
Originally posted by Adrianli View PostNo problem lah. U are running the boat for few mins only. Which ever direction also can.
No water cooling but fan cooling also can.
My wife was asking y I m so keen in d boat now which I left 1yr ago.
Then I show her ur avast big boobs she fully understand lol.
I m going to order some stuffs from hobby city which motor there is better than feigao 7xl?
Btw where on earth can I find a bag for my cheapo boat I search d net only found Austria it's us176 I can use d plane wing bag?Mugen Mrx2, HW 4274, HW Xerun150esc 6s
SCRT, HW Sct motor, HW Xerun120esc 2s
Team Driver for HobbyWing, Acorn racing & ManiacRC
Comment
Comment