Multi Rotor flyers hang out

[genghiskt]

Thanks for the info. Bro.

[Housecall physio]

Hi Bro....we'll be flying at the same venue As always ALL'S INVITED!!!

Hi Bro....we'll be flying at the same venue As always ALL'S INVITED!!!

Date :28 Apr 2013 (Sun)
Time : 2-4pm

the place is tuas south ave 14.

.

[bozora]

Hi Housecall Physio and all

A terrible miscommunication...my fault for the confusion.

The venue is the same as last week

Venue : 22 Jalan Jentera S619441 (Near Jalan Tukang)
Date : 28 Apr 2013 (Sun)
Time : 2pm - 4pm



This place is quite conducive..been flying there quite a bit...know the security guard well....so toilet break is no issue.

As always ...All's Invited

[Housecall physio]

happy flying...

[Housecall physio]

funfly this coming Sun 19 May 2013 Time : 2-4pm Venue : 22 Jalan Jentera S619441

Hello Boys and Girls....There will be a funfly this coming Sun...so bring along your quad, tri, hexa, octocopter, RC Kites, ParaGlider, etc!!!!

And...
For those who have problem setting and tuning your quad, bring it down....we'll dial in for you.
For those who wants us to upgrade your Naza M V1 to FW3.1...bring it down.
For those who just want to look-see and findout more....come on down too.
For the ladies who just want to lay their hands on a quad....look for Speeder


Venue : 22 Jalan Jentera S619441
Date : 19 May 2013
Time : 2-4pm
Kindly let us know your tentative participation
1) Speeder (DJI F550 Hexa on Naza M FW3.0)
2) Bozora (Gaui H540 Hexa on Naza M FW3.1)
3) Divegil (Octo on Zero UAV YS-X4 Navi Edition)

I pray for sunny sky.




And here's where we fly....note the building behind.

for more info

http://www.daddyhobby.com/forum/showthread.php?t=78642&page=26

[Justvan]

happy flyingggg

[grizzly7]

hi all,

I am a newbie and recently got myself a Bumble Bee Quad with minimal set up.

1) Bumblebee Carbon Fiber Quadcopter Frame 550mm
2) Hobbyking SS Series 25-30A ESC (card programmable)
3) Turnigy nano-tech 3300mah 3S 25~50C Lipo Pack
4) Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)

From the looks of it, the ESC does not really compatible with the setup and the I am missing some core parts.
Appreciate if any advise for all experts out there on the setup and what to order to complete the copter.

BTW, ordered these items from hobbyking.

Thank you in advance.

[boonyeo]

Hello

Few weeks ago when I walk along Queentown MRT I saw few ppl flying with they quadcopter.
R U all still flying there on Sat or Sun and what time U all flying there 800am to 11pm ?????