Discussion/Review on Trex600n issue

[detach8]

extremely beautiful bird. even nicer when you have a 2.4ghz and no visible antenna!

wilson you might want to increase the stick tension. i did so for mine since i realize my flips have been going off, even in the flight sim. after i increased the tension the flips were much more consistent (so did the fig 8s hehe)

[lu wei yao]

Wow.. Your progress looking fast! btw i mounted my Rev Max sensor instead of recommended vertical "L" from the wall.

I made it lying straight along with the Fan Unit Housing on top and aligned the sensor directly on top of the opening. Reason: my previous setup was exactly as per what u did and the Binding occured during manouver whereby the Fan unit might flexed and bind w the magnet causing the whole sensor to be stripped off as well as magnet gone.
Why i know is binding because i can see that the Fan unit has some melted portion at the magnet hole.
Suspecting the "L" sensor placed either too near or tendency to flex on the sensor too.

Now i have no problem with the straight lying sensor and Also take note of drilling the magnet HOLE to insert them fully sitted IN & epoxy them.

Note taken man.
If you have pics, even betta, im a visual person.

Im waiting for my metal grips to come in, LHS dont have them in stock at the moment.

Would be adding a header tank as well, im just too use to flying with one.

Thanx!

[wilson76]

Note taken man.
If you have pics, even betta, im a visual person.

Im waiting for my metal grips to come in, LHS dont have them in stock at the moment.

Would be adding a header tank as well, im just too use to flying with one.

Thanx!

Yeah..Metal Grip Likewise. Hope one of my flying kakis manage to grab one for me from taiwan. From Trexforum, one of the blade grip actually crack at the screw area and no crash before. Metal will give a better insurance and also smoother tracking & control.

[lu wei yao]

Yeah..Metal Grip Likewise. Hope one of my flying kakis manage to grab one for me from taiwan. From Trexforum, one of the blade grip actually crack at the screw area and no crash before. Metal will give a better insurance and also smoother tracking & control.

Precisely, is that kaki pang?

I have another friend in tw now too, also helping me hunt down grips.
Aligns plastic, as said by some, aint as good as the raptor ones.

Thanx!

[wilson76]

HaHa.. Yeah.. PANG ! Eh..then once complete come & fly w us!

[wilson76]

The Front View can see thru the cable running "White tape" on top of the Fan housing. It basically place horizontally straight. No bending of sensor to "L".



Side view..

[lu wei yao]

HaHa.. Yeah.. PANG ! Eh..then once complete come & fly w us!

I sure want to, but im the other suide of the country!
Easterner.

Thanx!

[wilson76]

I sure want to, but im the other suide of the country!
Easterner.

Thanx!

Oh.. no transport to come! Which part of the Eastern land you locate?

[jack_mav88]

I sure want to, but im the other suide of the country!
Easterner.

Thanx!

Me also in the eastern side

[CJen]

I fly with wilson76....come join us. Some day we will fly at your site too

I sure want to, but im the other suide of the country!
Easterner.

Thanx!

[lu wei yao]

I fly with wilson76....come join us. Some day we will fly at your site too

CJ ah, i don't drive, and don't own a car, if not i would have join you guys long ago!

Thanx!

[jack_mav88]

CJ ah, i don't drive, and don't own a car, if not i would have join you guys long ago!

Thanx!

Can join me at Tampines Industrial Ave 5 if you want

[lu wei yao]

Can join me at Tampines Industrial Ave 5 if you want

Yeah i do sometimes, usually tbp though, with my plane buddies.

Thanx!

[wilson76]

Need Advice from OS-50 hyper user.
Realise the engine if tune to lean, it gets too hot such that you can hear kinda of "metal" sound from the engine...
Anyone share same problem?

When i landed and retune to Rich, it's back to sound normal in flight.

Am i right to say ideally to maintain "Hot to touch" for 3secs@Backplate?

Currently tune to this 3sec Hot to touch setting, but still seeing Fuel spattering out from muffler. Normal?

[baby_zyklon]

Hot is subjective, but assume our fingers are as sensitive to heat, 3 seconds sounds pretty lean, but yours is 3seconds you feel HOT or 3seconds you feel like taking the finger away? Mine in the day time 4-6seconds finger MUST take away. Some say this is a bit lean, but I think its also partly due to our climate.

Fuel spitting and yet hot? Maybe you got other problem like something is grinding somewhere? Metal sound? Not sure.