GWS SlowStick

[hoppie]

anyone help?i scared buy esky crystals cannot use

Bring to shop and test.

[JieZ]

im thinking of this combo
XM2822CA-24 + Dualsky XC1010BA10A

or

Pulso Advance Plus series ESC (22A) + KA22-15M (1050kv)(with accessories)

Both same price.haha

[hoppie]

im thinking of this combo
XM2822CA-24 + Dualsky XC1010BA10A

or

Pulso Advance Plus series ESC (22A) + KA22-15M (1050kv)(with accessories)

Both same price.haha

What do you want to fly? Buying motor is not looking at the price but the applications. the XM2822CA-24 is for light weight plane with high KV. it's only a 100W motor. I would think it's only good for up to 400g of foam 3d plane etc.

You be better off with the KA22-15M with high torque and thrust. Or this will be good DUALSKY® XMotor XM2830CA-10.

[JieZ]

Fly Slowstick and foamies.any recommendation?

[JieZ]

Another combo
TF2208/17 Brushless Outrunner Motor, 2/3s lipo, 1100kV, weight 36g, shaft diameter 3mm, dimensions 27.5x26 mm

TFESC20A Brushless Electronic Speed Controller, 20A (continuous), 25A (max), 2/3s lipo, 32x24x7 mm

both from topflight

[hoppie]

Another combo
TF2208/17 Brushless Outrunner Motor, 2/3s lipo, 1100kV, weight 36g, shaft diameter 3mm, dimensions 27.5x26 mm

TFESC20A Brushless Electronic Speed Controller, 20A (continuous), 25A (max), 2/3s lipo, 32x24x7 mm

both from topflight

Get the Pulso, that's the best. I advise not to buy from the TF dealer.

[JieZ]

That's 3S setup.so far i only got 2S leh.

[Raven]

Think you guys should get your hands off the keyboard and just go out fly. The 1st generation Slow stick can fly with a 150 brush motor and a 6v 800mah NiCd batt. You dump in any brushless motor also it will fly. So stop getting bombastic over the set up and just check out the rest who have been using setup proven to perform well.

GW/SLOWSTICK-EPS150C

GW/SLOWSTICK-EPS300C

GW/SLOWSTICK-EPS400C

[nixaad]

Think you guys should get your hands off the keyboard and just go out fly. The 1st generation Slow stick can fly with a 150 brush motor and a 6v 800mah NiCd batt. You dump in any brushless motor also it will fly. So stop getting bombastic over the set up and just check out the rest who have been using setup proven to perform well.

GW/SLOWSTICK-EPS150C

GW/SLOWSTICK-EPS300C

GW/SLOWSTICK-EPS400C

Very sound advice. why oh why want to go ballistic with Slowstick, but hey! it's fun to see the stick fold it's wings when going into a dive. Hheheheheheee.....

[hoppie]

Very sound advice. why oh why want to go ballistic with Slowstick, but hey! it's fun to see the stick fold it's wings when going into a dive. Hheheheheheee.....

haha.......mine dun fold leh
But it's too heavy now after all the reinforcement.

[hoppie]

That's 3S setup.so far i only got 2S leh.

Heh Jie, how is your SS, fly with ur Brush motor 1st lar, whats the point of getting BL and crash if you cant handle it?

[JieZ]

now too windy to fly.my hus here is very very windy.too bad i've got no glider.

[tampines flyer]

dont worry bro all flyer will be happy to help.same as me i was a newbie be4

[JieZ]

im looking for 2S bl combo but can also work with 3S

[hoppie]

im looking for 2S bl combo but can also work with 3S

All BL combo can do 2s or 3s unless you getting those big big Motor then you can't but from what i know, most 28mm motor can do 2s and 3s. Not those 35mm ones.