Cox micro warbirds - Setup

[Shark]

Estimated :

1. ESC (GWS ICS-100) : $ 28
2. Rx (GWS 4ch pico) : $ 37
3. Servo (Blue Arrow 3.6g) : $ 29 each
4. Battery (Etec 2S 450mAh) : $ 33

Total cost = MORE THAN THE PRICE OF THE MICRO WARBIRD!!!

but not forget once u get the plane up in tha air.... price is PRICELESS

[UH-1H]

Guys i might need help, where and what do i need to get for my Receiver cos my TX is the Futaba T6XAS which i use for my Rex running at 29.750Mhz.
I think GWS don't make anything at 29Mhz

[Shark]

Guys i might need help, where and what do i need to get for my Receiver cos my TX is the Futaba T6XAS which i use for my Rex running at 29.750Mhz.
I think GWS don't make anything at 29Mhz

rotorhobby got..but think now no stock...u can try jethobby..btw 29Mhz is very difficult to find accessories...

[Shark]

O...ya... SHS got..but rather exp.. it is the orginal futaba 6ch micro Rx

[alamin2]

O...ya... SHS got..but rather exp.. it is the orginal futaba 6ch micro Rx

Yes the SHS rx are expensive .. Its on 29mhz ? I think some of us here are on Feigao Rx but its from that Chan. Not recommended.

if you die die do wanna get it, bring your Tx down to test. after buying, dont come back. $40 i think

[$h@d0w]

Latest Update

Just went down to Jet Hobby this afternoon. 3.6g servo no stock, left with the 4.6g ones. Better get your electronics stuff soon. I got a feeling that we might have an early Christmas....

[alamin2]

Just went down to Jet Hobby this afternoon. 3.6g servo no stock, left with the 4.6g ones. Better get your electronics stuff soon. I got a feeling that we might have an early Christmas....

shadow, the towerpro 5g servos can ?

[Monkey]

alamin2, y dun u try get from Wish, his 6g servo work better than my ex-SG50. i got 6 of them. working well.
by the way, SG50 is 5gram without wire+connector, 6gram with wire+connector~

[alamin2]

alamin2, y dun u try get from Wish, his 6g servo work better than my ex-SG50. i got 6 of them. working well.
by the way, SG50 is 5gram without wire+connector, 6gram with wire+connector~

thanks for the recommendation but im low on cash now hehe.. will do after i get some $$

[$h@d0w]

shadow, the towerpro 5g servos can ?

Sorry, no idea if it will fit anot.

[anderaw]

can i use the TowerPro SG-50 5gram Mini Servo on this plane? cause it is much cheaper

[...Kk...]

Yo bros,
Just came back from Riverside point, GFK still got the 3.6g Blue arrow servo at S$29. May want to try there.

Maybe repeating this but I still intend to try using those 5g servo. Is it advisable, like to save some money since I got 2 lying around?

Thanks
Kk

Just went down to Jet Hobby this afternoon. 3.6g servo no stock, left with the 4.6g ones. Better get your electronics stuff soon. I got a feeling that we might have an early Christmas....

[UH-1H]

Can i use this servos?
GWS Micro Servo?

[$h@d0w]

Building ?????

Has anyone started building their micro warbird?? I've finished the rudder, now half-way on the elevator. Really working slowly so as not to ruin the plane.

Btw, the paint is really thin. Normal masking tape will peel some paint off. Wonder if those Tamiya clear paint can be used to coat over the existing paintjob.

[Shark]

Has anyone started building their micro warbird??

bro.. since u bought all the 3g servo...guess I will hv to buy the 4.3g ones liao..hv not yet started, cos still thinking how to place the servo n where to cut n put the linkage (for the aerilon).

so when you going to madien the plane, any soooner???