Hobbywing ESC throttle calibration with Vcontrol Touch and Vbar Neo
1. Power up your Vcontrol.
2. Power up the heli.
3. On the Tx, got to Model Setup -> Edit Model Setup -> Touch "Start editing current Setup" -> Scroll down to "Governor Setup"
4. Touch "Select" at the Output Setup row (i.e. the centre Select).
5. Make sure that the throttle stick is all the way down. Touch the "On" button, and then touch "Yes".
6. Power down the heli. Just the heli. Vcontrol remains power on.
7. Now, move the throttle stick all the way up.
8. Next, power up heli again.
9. When you hear two confirmation beeps, move the throttle stick all the way down.
10. That's it. Your HW ESC throttle is now calibrated.
1. Power up your Vcontrol.
2. Power up the heli.
3. On the Tx, got to Model Setup -> Edit Model Setup -> Touch "Start editing current Setup" -> Scroll down to "Governor Setup"
4. Touch "Select" at the Output Setup row (i.e. the centre Select).
5. Make sure that the throttle stick is all the way down. Touch the "On" button, and then touch "Yes".
6. Power down the heli. Just the heli. Vcontrol remains power on.
7. Now, move the throttle stick all the way up.
8. Next, power up heli again.
9. When you hear two confirmation beeps, move the throttle stick all the way down.
10. That's it. Your HW ESC throttle is now calibrated.