Trex600N landed

[HotDogBun]

Rich ah? When I landed, the bottom plate is still touchable. Usually how you gauge with your hand when you feel the plate? I am certain I can place my finger there for at least 10 sec before I can feel significant heat.

[CKS]

wah .. maybe im twise as sensitive ... i cant 'feel' it beyond 5-6s

Rich ah? When I landed, the bottom plate is still touchable. Usually how you gauge with your hand when you feel the plate? I am certain I can place my finger there for at least 10 sec before I can feel significant heat.

[HotDogBun]

Guess I'm running it too rich?Maybe you can join our next flight help me check hehe.
Somehow I feel you always luck down when you join us. Haha.

[CKS]

wahhaha.. maybe
dont know whos the jinx

Guess I'm running it too rich?Maybe you can join our next flight help me check hehe.
Somehow I feel you always luck down when you join us. Haha.

[mh3400]

wahhaha.. maybe
dont know whos the jinx

haha maybe one of us the " 8 charactor does not match with your's"

[lu wei yao]

TT53 Old/New Carb Difference

Hey guys,

Finally a definitive difference between the OLD and NEW Redline carbs.
Follow the link:

http://www.runryder.com/helicopter/t465927p1/

Glad to say, mine is the new carb.
Yet to use it in anything though.

Thanx!

[GTR35]

redline

thx for ur info.
mine not yet check but hope its the new carb if not

[HotDogBun]

The bog down from mid stick onwards seems to be improved drastically when I lean the high end. Low end remained. But it seems to be still rich? I can place my finger on bottom plate for at least 5 sec before I can feel the heat, immediately after I landed.
Anyway my flight time still 6½ mins near 7min ... I wonder why ...

Guess I'm running it too rich?Maybe you can join our next flight help me check hehe.
Somehow I feel you always luck down when you join us. Haha.

[CKS]

Bun, you can lean it more... and also increase ur piro rate too

The bog down from mid stick onwards seems to be improved drastically when I lean the high end. Low end remained. But it seems to be still rich? I can place my finger on bottom plate for at least 5 sec before I can feel the heat, immediately after I landed.
Anyway my flight time still 6½ mins near 7min ... I wonder why ...

[HotDogBun]

Ok Sir, will try to practise more on SIM first But the thought of my heli piro faster haunts me... anyway I tried out on SIM last night, lots of SHIT but am making little progress.
Thanks.. I'll lean it with 1-2 clicks every flight till the plate is hot

[HotDogBun]

My most favourite heli among all my other helis. The Redline is serving me very well together with the CY ATG on Active Mode. I'm on 1850Rpm but finds it bit fast to my liking though.
Tried to change the ball links since I've gone through more than 6 galloons but realised the links are perfectly ok
But I'm still about 6.5min of flight from hover to land with header tank near full. So strange, was hopping to get at least 7.5min flight

I LOVE MY TREX600N !!!!!!

[TmMugen]

Hello all trex600 flyers:

Can I check what is the servo horn length you guys are using for the tail servo?

I am using 11mm with JR770 and 8900G combo and had tail bounce back when in Idle Up mode. Normal mode is fine. If I up the gain there will be wagging..

Anyone tried 8mm before and had good results..??

[CKS]

im using the wheel type servo horn that came with 8900G, gyro is Spartan ds760, with headspeed good enough for 3D, no problem so far

Hello all trex600 flyers:

Can I check what is the servo horn length you guys are using for the tail servo?

I am using 11mm with JR770 and 8900G combo and had tail bounce back when in Idle Up mode. Normal mode is fine. If I up the gain there will be wagging..

Anyone tried 8mm before and had good results..??