sailplane

[avoilte2004]

G,day to jus doing a ground chk to see which sailplane plane is the more popular selection in SG.

kindly post your model... if possible pls describe your set up

thanks to all....

[lu wei yao]

It really depends on what you are looking for. There are many classes of sailplanes. From fast to slow. Cheap to really expensive. Its really up to what style of flying you are looking for.

Thanx!

[Crabby]

G,day to jus doing a ground chk to see which sailplane plane is the more popular selection in SG.

kindly post your model... if possible pls describe your set up

thanks to all....

eHawk 1400


Seems like rotor's stock were sold off rather quickly before the season even starts.
My setup
Aeronaut 5X5 folding prop(recently added)
AXI 2212/20
CC 25
Kokam 1500mah
2X HS 55
Hitec electron 6 Rx

[TrexXL]

hi, i have a 3 channel glider(throttle, rudder and elevator)...but i intend to get another glider for more serious flying...wad would u all recommend me to get? my budget for the kit is around 100 to 200 plus...prefebly a powered glider, with ailerons, throttle, rudder and elevator...wad other good glider are there other then the multiplex easy glider electric??thx...

[Newflyer1]

crabby, ehawk is nice... wat i plan to get next.. but too new to fly tat now....

Also, for ehawk, no need slope to fly rite?

[Crabby]

crabby, ehawk is nice... wat i plan to get next.. but too new to fly tat now....

Also, for ehawk, no need slope to fly rite?

Ya no need slope to fly. Drumbeat has one that flies on brandless BL outrunner that can do inverted rolls! I like the profile & it is a smooth glider too. If u r getting this. Please do careful especially when u are fixing the V-tail. Can be quite a challenge to get it aligned. So do be careful. However, recently I had a mid-air crash wif YZY. My elevator servo gear broken. Tried changing the gears bought from rotor but it doesn't seems to fit in. So will be changing a whole new servo. Some cracks on the fuseluge too. Think will use some fiber cloth & Z-poxy to fix it. Never fix a Carbon fiber fuseluge before. I dunno if this is the right way... any advices from here?

Hope u get one of thhis & see on in BR soon

CrabbyZzz