Hi guys. I recently built a tricopter. The RCexplorer design.
However, i am having problems with my Rx. It seems to be browning out in mid flight even when the tricopter is 1-2m in fornt of me.
I have also noticed that one ESC tends to be extremely hot after each flight unlike the others. the ESC are even placed in the propwash.
After the first of my two crashes, some of the seniors and more experienced flyers at HQ SCDF told me that my ESC could be causing the RX to brownout.
The tri was still flyable after the first crash but the second crash wrecked the whole thing.
the motors run at close to 11-12AMP according to some ppl who posted stats on the motor so my 18A ESC is within limits.
Would appreciate your help.
However, i am having problems with my Rx. It seems to be browning out in mid flight even when the tricopter is 1-2m in fornt of me.
I have also noticed that one ESC tends to be extremely hot after each flight unlike the others. the ESC are even placed in the propwash.
After the first of my two crashes, some of the seniors and more experienced flyers at HQ SCDF told me that my ESC could be causing the RX to brownout.
The tri was still flyable after the first crash but the second crash wrecked the whole thing.
the motors run at close to 11-12AMP according to some ppl who posted stats on the motor so my 18A ESC is within limits.
Would appreciate your help.
Comment