JW Heli Flyers?? Evolution

[kiratime]

yo guys any of u hav spare miniT blades u willing to sell me at good price little short of cash and i just crashed

[kiratime]

Kiratime, anyway, you are flying well , keep it up

thanks bro i hope to be as good as u 1 day

[Serpent]

ok i got it ill be reseting up my tail as i just realised i dint loctite my tail in place
for the whole heli not much probs serpent saw me fly my miniT

Kiratime, anyway, you are flying well , keep it up

[Serpent]

"Practicing" nose in liao.

Oh, forgot to mention , actually he already knows how to do nose-in , he is just trying to do it on the real thing. What am I saying ?

[Serpent]

ok i got it ill be reseting up my tail as i just realised i dint loctite my tail in place
for the whole heli not much probs serpent saw me fly my miniT

"Practicing" nose in liao.

[kiratime]

Forgot to tell you. 1st thing 1st b4 you start configuring, make sure in non HH mode, your CH4 servo arm is mechanically @ the center..without any subtrim or trim.

ok i got it ill be reseting up my tail as i just realised i dint loctite my tail in place
for the whole heli not much probs serpent saw me fly my miniT

[flameangel]

Forgot to tell you. 1st thing 1st b4 you start configuring, make sure in non HH mode, your CH4 servo arm is mechanically @ the center..without any subtrim or trim.

[kiratime]

esky gyro? not sure if it can be set properly.. but u can try the rate setup then change to HH mode way

those that have used esky gyro pls chip in, i have no idea..

hey bro what time will u be at the 'field' 2day?

[kiratime]

I know wat you mean cos i personally experienced that before. Now i will impart this top secret knowledge i learnt from spongebob to you.

1. Set your servo to EPA 125 (Rudder)

2. In Rate (Gain below 40%) mode, made sure your tail blades are at zero degree.

3. Now check whether you have full movement on the rudder

4. Well, on my Gy401, i'm able to increase/decrease the servo movement by turning the button clockwise or anticlockwise.

5. Now start hovering in Rate mode and start sub trimming your CH4 until the heli tail hold.

6. Now, turn off Transmitter & set it to HH mode

6. Good luck flying

thanks bro!!!

[flameangel]

I know wat you mean cos i personally experienced that before. Now i will impart this top secret knowledge i learnt from spongebob to you.

1. Set your servo to EPA 125 (Rudder)

2. In Rate (Gain below 40%) mode, made sure your tail blades are at zero degree.

3. Now check whether you have full movement on the rudder

4. Well, on my Gy401, i'm able to increase/decrease the servo movement by turning the button clockwise or anticlockwise.

5. Now start hovering in Rate mode and start sub trimming your CH4 until the heli tail hold.

6. Now, turn off Transmitter & set it to HH mode

6. Good luck flying

im now having probs with my gyro/tail/or rudder channel
only at 50% gain(radio) do i get little left rudder movement and alot of right rudder movement anything higher by alot then 50% i got no left rudder movement at all any helps?

[kiratime]

Kira, did you buy your Esky HH gyro from RCE? if yes, i suggest you bring down your heli and let chong take a look.

If i'm not wrong the esky HH gyro does not have a reverse switch, you may have to mount it upside down, sideway etc. You need to tikum tikum.

im now having probs with my gyro/tail/or rudder channel
only at 50% gain(radio) do i get little left rudder movement and alot of right rudder movement anything higher by alot then 50% i got no left rudder movement at all any helps?

[flameangel]

Kira, did you buy your Esky HH gyro from RCE? if yes, i suggest you bring down your heli and let chong take a look.

If i'm not wrong the esky HH gyro does not have a reverse switch, you may have to mount it upside down, sideway etc. You need to tikum tikum.

[johndyl]

ok sure i downloaded 1 of the steps for the oem logitech now i know i must setup gyro in rate mode and after that adjust the EPA again and now i now EPA can effect ur piro rates!! yay the vids really do help thanks guys
oh ya vincopter i brought my esky gyro and servos over to my miniT

esky gyro? not sure if it can be set properly.. but u can try the rate setup then change to HH mode way

those that have used esky gyro pls chip in, i have no idea..

[kiratime]

http://www.helifreak.com/showthread.php?t=68319
for the hitech 5000, same as logictech 2100t(OEM)

401 setup here

http://www.helifreak.com/showthread.php?t=11373

everything u need is here............... just take some time to read, anyway it's ur school holidays

http://www.helifreak.com/forumdisplay.php?f=60

the next time, i hope there wont be more "feed me" type of questions........ hope u understand...

ok sure i downloaded 1 of the steps for the oem logitech now i know i must setup gyro in rate mode and after that adjust the EPA again and now i now EPA can effect ur piro rates!! yay the vids really do help thanks guys
oh ya vincopter i brought my esky gyro and servos over to my miniT

[johndyl]

haha now i know whats the expo for!!!
i downloaded a whole load of vids but do u know where i can find the vid for seting up gyro and tail cant seem to find the proper 1 all the others are a diff content

http://www.helifreak.com/showthread.php?t=68319
for the hitech 5000, same as logictech 2100t(OEM)

401 setup here

http://www.helifreak.com/showthread.php?t=11373

everything u need is here............... just take some time to read, anyway it's ur school holidays

http://www.helifreak.com/forumdisplay.php?f=60

the next time, i hope there wont be more "feed me" type of questions........ hope u understand...