JW Heli Flyers?? Evolution

[jansonfinn]

i can move everything in my heli except the motor

ok, then it should be ur ESC like wat johndyl mentioned, it nva detect low throttle point from ur tx

[kiratime]

could be no connection between the Tx n Rx, that's y the ESC can't be armed

i can move everything in my heli except the motor

[johndyl]

ok ill double check with heli fanatic did he press any wrong button ytd thanks for you time!

with Ian helping u out, u shld be fine

[jansonfinn]

oh ya the motor wont start i chcked my tx nothing wrong with it and it always goes teh teh teh then no initialsing song or tune or tone

could be no connection between the Tx n Rx, that's y the ESC can't be armed

[kiratime]

it means setting up the tx throttle range to match with the esc range.

u either adjust ur throttle endpts on the tx or calibrate it during the esc setup.. chk ur esc manual

if not calibrated or even worse..reversed, the esc will not arm because no low stick is detected..


what tx r u using? it is best to get help if u are not sure, drop by ur nearby ff and ask for help

ok ill double check with heli fanatic did he press any wrong button ytd thanks for you time!

[johndyl]

um what u mean by calibrate the esc??

it means setting up the tx throttle range to match with the esc range.

u either adjust ur throttle endpts on the tx or calibrate it during the esc setup.. chk ur esc manual

if not calibrated or even worse..reversed, the esc will not arm because no low stick is detected..


what tx r u using? it is best to get help if u are not sure, drop by ur nearby ff and ask for help

[kiratime]

have u calibrate the esc with the tx yet?

um what u mean by calibrate the esc??

[johndyl]

oh ya sorry forgot to say its hobby wing guard 40a esc

have u calibrate the esc with the tx yet?

[kiratime]

sounds like it is not arming..

what esc is it?

oh ya sorry forgot to say its hobby wing guard 40a esc

[johndyl]

oh ya the motor wont start i chcked my tx nothing wrong with it and it always goes teh teh teh then no initialsing song or tune or tone

sounds like it is not arming..

what esc is it?

[kiratime]

hi guys i wetn to heli fanatic house to recieve some help on soldering and after solder we decided to set a tune for the heli we set the merry christmas tone when i went it refused to sing! lols i checked the connection to rx and tried all 9 possible connections from the motor to esc everything seems to be in place we also activate the governor any help?? i du nhave the programming card so cant see whats wrong

oh ya the motor wont start i chcked my tx nothing wrong with it and it always goes teh teh teh then no initialsing song or tune or tone

[kiratime]

hi guys i wetn to heli fanatic house to recieve some help on soldering and after solder we decided to set a tune for the heli we set the merry christmas tone when i went it refused to sing! lols i checked the connection to rx and tried all 9 possible connections from the motor to esc everything seems to be in place we also activate the governor any help?? i du nhave the programming card so cant see whats wrong

[flameangel]

Mebbe some kids already using CYB blades as ruler. Some even have LED lights.

haha, can pass them to ur children for them to use them in class. Then their classmates will be envy for them as they only have the normal plastic & alumimum material as ruler.

[jansonfinn]

done that liao.. but now decided that it's best use as ruler and can also use it to tear papers..

haha, can pass them to ur children for them to use them in class. Then their classmates will be envy for them as they only have the normal plastic & alumimum material as ruler.

[tucfaz]

done that liao.. but now decided that it's best use as ruler and can also use it to tear papers..

wao, u used them as ruler ah?

I was still thinking to use them to scratch my back!