guess this has been discussed but it could not solve my problem.
my setup: Futaba 9CHP, Trex XL eCCPM, HS56 all round, electron 6 Rx, GY401, CH1 aileron, CH2 elevator, CH3 throttle, CH4 rudder, CH5 gyro, CH6 pitch.
well here goes...
according to the Futaba manual, the swash type should be SR3 (did that)
but when i moved the throttle up and down, the swash actually performed an elevator movement.
and when i pushed the elevator stick up and down, it performed a throttle movement (i.e. all 3 servos moved).
i have tried adjusting the swash AFR, but nothing seems to work (got worse instead). i have read the threads at RCgroups but the post by superhornet assumes that the swash movement is correct.
i don't know what else i can do... jialat thought of doing maiden tomorrow now this cropped up
experienced rex owners with 9CHP, pls help. tolong tolong.
my setup: Futaba 9CHP, Trex XL eCCPM, HS56 all round, electron 6 Rx, GY401, CH1 aileron, CH2 elevator, CH3 throttle, CH4 rudder, CH5 gyro, CH6 pitch.
well here goes...
according to the Futaba manual, the swash type should be SR3 (did that)
but when i moved the throttle up and down, the swash actually performed an elevator movement.
and when i pushed the elevator stick up and down, it performed a throttle movement (i.e. all 3 servos moved).
i have tried adjusting the swash AFR, but nothing seems to work (got worse instead). i have read the threads at RCgroups but the post by superhornet assumes that the swash movement is correct.
i don't know what else i can do... jialat thought of doing maiden tomorrow now this cropped up
experienced rex owners with 9CHP, pls help. tolong tolong.
Comment