Announcement

Collapse
No announcement yet.

Humming Bird CP has landed!

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Humming Bird CP has landed!

    Saw it at jethobby this afternoon. one customer bought 1 right after it came so i think now left 3. just the kit and motor, no mixer, going for $180.

    #2
    I got one

    CCPM head

    Comment


      #3
      Autorotation main gear

      Comment


        #4
        Wah $180 with that one way is cool...... will wait for Frank verdict


        Mike

        Comment


          #5
          The One way have to pay one lah

          Comment


            #6
            Cool! Can't wait to see this one in person.
            Frank do you reckon the one way will work with the our Fedas?
            How much was the one way?
            -Feda Dragonfly
            -Hornet 2
            -Pilot OK Turmeric
            -Zoom Zoom 4D
            -Sceadu EVO 50: OS50, Hatori521, Revmax,
            -Hornet X3D
            -Hornet X3D (yet to setup!)
            -Formosa 1
            -World Models Spot On 50
            -HB King 2
            -World Models Groovy 50 F3A
            -RICCS F18 EDF

            Controlled by 9CHP
            (Temasek Poly AMIG)

            Comment


              #7
              The thing I like about this CP Hummingbird is its anodized aluminium base.

              Super-Hornet

              Comment


                #8
                Check their site but nv indicate if it works w FP FB



                Mike

                Comment


                  #9
                  Review review review! Pretty please
                  Failure is not final,
                  Success is never ending:
                  It is not the destination but the journey that matters.

                  Wadever the journey, keep flying!

                  Comment


                    #10
                    you can't auto-rotate the fp feda. a slipt second after your motor goes into throttle hold, your blades would have lost way too much airspeed due to the pitch in the blades. in order to do an auto, you need to be able to get negative pitch.
                    JR 9x
                    Raptor 50 SE
                    Raptor 90 3D
                    Mini-Titan


                    Superb machine!

                    Piper Warrior 2 Pa-28-161
                    Lycoming O-320-D3G 160HP

                    Pilatus PC-21
                    Pratt & Whitney PT6A-64B 1600SHP

                    Comment


                      #11
                      even then i doubt there is enough mass to maintain the auto for long, what you'll be using is whatever rpm that is left on the head, and you'll have to be more conservative with giving lift than nitro
                      JR PCM 9XII
                      35.150


                      BEAM E4

                      HS65 Cyclic
                      Futaba S3154 Tail
                      Scorpion 2221-8
                      JETI Spin 44A
                      JR RS 77
                      Logictech 2100 TL Gyro
                      Thunder Power TP2070-3SX

                      A Bottle Of Guts, Neat.

                      Comment


                        #12
                        Nah, obviously its not to autorotate the FP.
                        One ways are not just limited for CP and for autorotation. In an FP, it will help prevent the tail from kicking to the right during a rapid reduction of throttle. Especially with a motored tail like the Feda.
                        -Feda Dragonfly
                        -Hornet 2
                        -Pilot OK Turmeric
                        -Zoom Zoom 4D
                        -Sceadu EVO 50: OS50, Hatori521, Revmax,
                        -Hornet X3D
                        -Hornet X3D (yet to setup!)
                        -Formosa 1
                        -World Models Spot On 50
                        -HB King 2
                        -World Models Groovy 50 F3A
                        -RICCS F18 EDF

                        Controlled by 9CHP
                        (Temasek Poly AMIG)

                        Comment


                          #13
                          Saw some thing on the RunRyder site: The 43rd shizuoka hobby fair in japan on May showing a JR mirco heli product call Parkmite anybody seen it already? Any feedback on this heli yet? Looks very nice and had some carbon parts on it. I think she will be out next year where the production will take place. Pictures is on Jason web site take a look and see hope this new toy will come to your next list.

                          Cheers: Jameswilliam

                          Comment


                            #14
                            Yah the parkmite definitely looks nice, but the price is going to be a killer. expect something way higher than the hornet 2.

                            One way is used to improve fast forward flights as well, allowing the rotor to gradually adjust to rpm changes, thus giving smoother speed/height transitions

                            Comment


                              #15
                              looks good, let us know how that flies !

                              Comment

                              Working...
                              X