Hi guys, any idea if i use jazz 55 on T500 with stock servos, DS3500G and 770t gyro. ar6100. do i need an external BEC?
Announcement
Collapse
No announcement yet.
Jazz 55
Collapse
X
-
if it is this one
then the BEC is rated for 2A.. which is too abit small for all round digital servos
btw the 65A peak rating is also abit on the low side. u should be using something with at least a 70A peak depending on your flying styleFor sale
trex 700/ 12mm main shaft swash leveller. carbon type $22 only new
Comment
-
Originally posted by Alex Khoo View PostHi jonathan
do u use it with an external BEC?
what servos are u using?
re,
alex khoo
It is a bit light, however do note that Kontronik spec are conservative from the experience that I have. And I have used lots of Jazz in the past few years. Also Jaxx have the feature that when overload it will not shut down immediate but lower the current draw thus result in your heli not cut off power immediately but drop in performance but give you time to take it in.
JOnathan
Comment
Comment