hi anyone every use rjx head set on rapror 50 size? n can it fix in good?
Announcement
Collapse
No announcement yet.
raptor 50
Collapse
X
-
Jumat,
baby_zyklon has a RJX head on Raptor 50. u can ask him how it is working for him.
cheers!
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
Comment
-
My conversion journey.
I now prefer the yellow RT over the silver funkeys. After some readjustment of tx setting, it now flies very good on clam days. Just need more power. Rolls quite a bit faster than what I had. No $$ for super stubz and lazy to take off from 700N.
Personally, I don't recommend that you do it unless you have a lot of spare time at hand and can get a good deal for the head. It took me a few days(and I do mean full day from morning to evening) to get everything sorted out, adjusted and fly good. Might make more economic sense to sell your raptor and buy another heli.
Material of the rotor head is not quite what I will call good, but its acceptable. Crashes might be expensive, but then you probably won't be crashing that often if the stock head is already limiting you.
Support from ken is very good. Any problem, just send him an e-mail and he will reply within a few hours. Same goes for RJXchina, just shoot the question on runryder and usually they will reply within half a day.
A good way to see if you or the stock raptor is the limitation is to change the mixing level to some aftermarket ones like kasama/g-force and try running +/-12deg of collective and 8deg of cyclic. If you find yourself flying better after the change, then congratz, you have "out-flown" the stock raptor and have found a new playground. The new RJX rotor head will do you good.
Do note that the RJX head with the settings I gave don't hover very well in the wind with very strong tendency to go into the wind.
sigpic
Comment
-
raptor 50
Originally posted by baby_zyklon View PostMy conversion journey.
I now prefer the yellow RT over the silver funkeys. After some readjustment of tx setting, it now flies very good on clam days. Just need more power. Rolls quite a bit faster than what I had. No $$ for super stubz and lazy to take off from 700N.
Personally, I don't recommend that you do it unless you have a lot of spare time at hand and can get a good deal for the head. It took me a few days(and I do mean full day from morning to evening) to get everything sorted out, adjusted and fly good. Might make more economic sense to sell your raptor and buy another heli.
Material of the rotor head is not quite what I will call good, but its acceptable. Crashes might be expensive, but then you probably won't be crashing that often if the stock head is already limiting you.
Support from ken is very good. Any problem, just send him an e-mail and he will reply within a few hours. Same goes for RJXchina, just shoot the question on runryder and usually they will reply within half a day.
A good way to see if you or the stock raptor is the limitation is to change the mixing level to some aftermarket ones like kasama/g-force and try running +/-12deg of collective and 8deg of cyclic. If you find yourself flying better after the change, then congratz, you have "out-flown" the stock raptor and have found a new playground. The new RJX rotor head will do you good.
Do note that the RJX head with the settings I gave don't hover very well in the wind with very strong tendency to go into the wind.
Comment
Comment