Trex600N landed

[HotDogBun]

Ok I have disabled Gov. Now direct to RX. Will catch the hovering RPM first.

Once I have the hovering RPM, will use that as the lowest point when on Idle mode. This is correct right?

Btw, CKS whats ya collective like? I'm on 11s.

[CKS]

yea that would be a good start if you prefer to hover on idle mode, then i'd slowly increase it on each flight.

ill be using +-11 collective and +-7 cyclic pitch

Ok I have disabled Gov. Now direct to RX. Will catch the hovering RPM first.

Once I have the hovering RPM, will use that as the lowest point when on Idle mode. This is correct right?

Btw, CKS whats ya collective like? I'm on 11s.

[HotDogBun]

Waiting for weekend to do the running in.
Think will need to tach so I know at what throttle percentage is the RPM I want.
I also had some minor issues with my JR770T.
My piros are smooth and consistent on both directions. The problem is when I am hovering, the tail will drift bit by bit to the right, meaning head turning left.

Any advise? I know its basics but its a long long time since I had problem with my tail.

[HotDogBun]

Hijack your thread to show off my BIRD

[bobby]

Hijack your thread to show off my BIRD

nice heli

[CKS]

ive a tach if u need help.. but i'll be in segar this sat morning.
Tail not holding because rpm too low while running in?

Waiting for weekend to do the running in.
Think will need to tach so I know at what throttle percentage is the RPM I want.
I also had some minor issues with my JR770T.
My piros are smooth and consistent on both directions. The problem is when I am hovering, the tail will drift bit by bit to the right, meaning head turning left.

Any advise? I know its basics but its a long long time since I had problem with my tail.

[CKS]

Hey.. nice canopy .. nice HotDogBird
why so many red washers? thats wei yao's signature style

Hijack your thread to show off my BIRD

[HotDogBun]

I also want to Zng my heli mah
Think my stolen stock canopy is a blessing, RCS's canopy really rocks
Sat morning, I try see Edmond want to go anot .... We likely in our usual hotspot

[lu wei yao]

Hey.. nice canopy .. nice HotDogBird
why so many red washers? thats wei yao's signature style

You Bet It Is!
HDB, i heven't posted my 600n just yet, for a very good reason.
I'll wait.

Thanx!

[ammo]

Dun worry, if u all happen to 'need' more canopies, I have a few hanging in the shop now

[HotDogBun]

Ken I was eyeing the orange ones but will put on hold first
Nitro is not cheap nowadays
Anyway I also like those button screws from your shop RCS. It goes well with the mod I made.

[edmond22]

Ah that reminds me, I haven't paid him yet! lol. Ken, the starter shaft mysteriously came loose itself and I sorted out the problems.

[ammo]

Ah that reminds me, I have pay him yet! lol. Ken, the starter shaft mysteriously came loose itself and I sorted out the problems.

I have mailed out the 2 outstanding parts which arrived on Monday.
Will update you on the bill later on

Back to topic

[edmond22]

HDB and all who is looking at the ATG settings, hope this info I come across will be useful to you.


Engine surging with ATG v2 (this apparently point to engine tuning as culprit)

http://www.runryder.com/helicopter/t413323p1/?highlight=atg+idle+mode

Setting up with DX7 (ability to turn on/off ATG at will)

http://www.runryder.com/helicopter/t361881p1/?highlight=atg+idle+mode

[CKS]

Very good reference
Gd short read on engine tuning ... and of coz the important of doing that b 4 enabling the governor

HDB and all who is looking at the ATG settings, hope this info I come across will be useful to you.


Engine surging with ATG v2 (this apparently point to engine tuning as culprit)

http://www.runryder.com/helicopter/t413323p1/?highlight=atg+idle+mode

Setting up with DX7 (ability to turn on/off ATG at will)
http://www.runryder.com/helicopter/t...=atg+idle+mode