Trex rudder can't neutral

[zonerx]

My trex just had a maiden flight, manage to tune the pitch & hover at 50% throttle but the rudder keep heading right side when throttle up, tried strim & manual trim also can't solve it, is it not neutral or my 401 gyro direction is wrong? anyone have this problem before?

[Super-Hornet]

Your Gyro direction unable to see clearly.

U using 401.... did u connect to channel 5? Hehehe.

If u do connect... did u set your TX for the gain value?

If u do... did u disabled your Revo Mixing?

If u do... did u let your GY401 initialize itself before u move your Gyro or Heli?

Super-Hornet

[Frank]

Your revo mix is on.
Turn it off and you will not have this problem

[Adrianli]

It should be your revo mix is on. Mine also had this problem until I called HZM to check for me and found out that the revo mix is on.

[zonerx]

Originally posted by Super-Hornet
Your Gyro direction unable to see clearly.

U using 401.... did u connect to channel 5? Hehehe.

If u do connect... did u set your TX for the gain value?

If u do... did u disabled your Revo Mixing?

If u do... did u let your GY401 initialize itself before u move your Gyro or Heli?

Super-Hornet

yes

yes

yes, revo=0%

yes

[zonerx]

btw i'm using eclipse7 so revo can only set to 0%

is there a way to reset the gyro?

thanks

[JYZoom]

Trying switching the DIR on the gyro to the other direction. It work for me. Jonathan