walkera spare parts

[SniperWj]

ur reply is beneficial for me and others who encountered such pblm~!!!!!!

xie xie!!!!!

[oetomo]

ur reply is beneficial for me and others who encountered such pblm~!!!!!!

xie xie!!!!!

u r welcome. Let me know how it goes. This heli is really fun to fly once you have dialled it in. In terms of the adrenaline rush that it gives, it is on par with my kyosho caliber m24 . the only exception is that most of the time you will still manage to get yourself out of trouble because it is a ccpm.
You can use pixie-zap blades for this heli. Get it from Singapore hobbies, a pack of 2 sets of blades is $8, I think. Have fun!

[SniperWj]

bad news for me~ main motor still moving~~ pbly cause of faulty reciever

oetomo can i meet you up personally??

[Heliboy24]

Don't Ever Go to Champion Hobby! You will get ripped off!
It was one of the worst mistakes i made when buying my heli.

[SniperWj]

help!

[SniperWj]

bad news for me~ main motor still not!! not! not! moving~~ pbly cause of faulty reciever !!!

(i left out the "NOT" at last post! )


oetomo can i learn on how to play with the #52 from you?

i realy need help on this~~

[oetomo]

bad news for me~ main motor still not!! not! not! moving~~ pbly cause of faulty reciever !!!

(i left out the "NOT" at last post! )


oetomo can i learn on how to play with the #52 from you?

i realy need help on this~~

Have you checked if your motor is working by connecting a battery accross the terminals, just so you can be sure that it is not your receiver that is dead. If your receiver is dead, you have no choice but to get a new one if you want to fly this heli.

We can try to meet up this Saturday. You can bring your stuffs to my place at Hougang and we can trim your heli then. I will PM you.

[SniperWj]

yah~ the motor is fine~~ just the receiver go bad liao~

for my case~~ i can go to ur place any time if you free~

(realy good news for me!)

realy want it to fly

you can ring me at 92727302 Yi Ming

[zattan22]

bad news for me~ main motor still not!! not! not! moving~~ pbly cause of faulty reciever !!!

(i left out the "NOT" at last post! )


oetomo can i learn on how to play with the #52 from you?

i realy need help on this~~

what controller u using????
e-sky??optic6??futaba??sanwa???

[SniperWj]

the wakera 352 is RTF

so im using the radio it come with ~~

[h20mn]

RX- Throttle Dip Switch 3

Hi SniperWJ,

you may try switching the Dip Sw.
1)Before u do that, remove the rotor blades first.
2)Turn on the Tx
3)power up the RX
4) throttle up slowly, check if the motor is runnning.
if not, toggle dip sw 3, on-off. be care, the motor may spin at full speed.

5) put dip sw 3 to default off position, then try throttle up again.

Try it. if problem still persist, PM me.
Regards,
HO

the wakera 352 is RTF

so im using the radio it come with ~~