Help! Pull Start Screws!

[Orangie]

of coz....after 1 RC session, all extra money must go to kopi and ........ more parts for RC

And that's money well spent

[Icon]

I think of it this way, after fixing the screws have to try to start engine to test mah. If cannot start, can ask Ben or any expert at the track for help. Then if possible, test run the car on the track and work on the setup. If everything works fine, can sleep peacefully

Happy ending One time effort

Also got makan too..... that's killing many birds at one go


When I'm gian, blood rushing out my nostril or can't sit for 5 min with a rc problem, it seems like no place that is out of the way ... that's just me

A 4 screws problem That's a good one

Asking Ben for help is ok... but as for the "experts" around the track.. err.. think i'll pass lar...

[Orangie]

Asking Ben for help is ok... but as for the "experts" around the track.. err.. think i'll pass lar...

Why lei? Don'tyou think those fast drivers there are not able to give sound advise?

[Icon]

Why lei? Don'tyou think those fast drivers there are not able to give sound advise?

I have seen newbies running in engine (thus engine was rich) and the experts there tell that poor chap his engine too slow, not tuned properly, the newbie then let the expert leanout his engine.. sure his engine was fast... fast on the way to a premature death. LOL... '

[Orangie]

I have seen newbies running in engine (thus engine was rich) and the experts there tell that poor chap his engine too slow, not tuned properly, the newbie then let the expert leanout his engine.. sure his engine was fast... fast on the way to a premature death. LOL... '

The newbie may have got what he asked for...POWER

[eleewhm]

richard.. M2.6 screw is avaliable at pansun....

i just bought 20 pcs
10 of M2.6 x 10

and 10 of M2.6 x12

its 0.45 cents each....

why i bought...lol stripped the cap of my os 32 engine also... heng still can removed the screw....just hammer in a screwdriver into the dformed head and unsrew it out....

[Richard]

richard.. M2.6 screw is avaliable at pansun....

i just bought 20 pcs
10 of M2.6 x 10

and 10 of M2.6 x12

its 0.45 cents each....

why i bought...lol stripped the cap of my os 32 engine also... heng still can removed the screw....just hammer in a screwdriver into the dformed head and unsrew it out....

Hi eleewhm,

Sorry long time nv freq this thread..
I am surprised you can buy this there. I have been there 3 times, asked all different people and response is negative all the time. Maybe you way you ask for it is different.. What did you ask for?

Anyway, I solved my problem by asking my mechanical engineer at my last workplace to source for it. And happen he had some in his toolbox..

Still, i must thank you for giving this info. But I really like to know how did you ask for at pansun?

[eleewhm]

Richard..

here is how i ask..

me: "got M2.6 x 12 cap screw or not?
auntie:"have..how many?"
me: " give me 20 pcs of M2.6 x 12 and 10 pcs of M2.6 x 10"
auntie:" SS or black one??"
me:" black one"...why black..?..cuase the black ones are C12.6 Hardened ones...
auntie wrote on plastic bag M2.6x12 and M2.6x10 and went to back of store to pick up screws...came back check PC fo price...
auntie : " $9 for alll"
me:" how much for one?"
auntie:" 0.45 cents "
me:"ok"

paid and left...

[Richard]

Richard..

here is how i ask..

me: "got M2.6 x 12 cap screw or not?
auntie:"have..how many?"
me: " give me 20 pcs of M2.6 x 12 and 10 pcs of M2.6 x 10"
auntie:" SS or black one??"
me:" black one"...why black..?..cuase the black ones are C12.6 Hardened ones...
auntie wrote on plastic bag M2.6x12 and M2.6x10 and went to back of store to pick up screws...came back check PC fo price...
auntie : " $9 for alll"
me:" how much for one?"
auntie:" 0.45 cents "
me:"ok"

paid and left...

I am damned.. Damn suay.. Went 5 damn time ask for M2.6, say dun have.. dun even check. I think they see pple one lah.. Maybe I look poor loh..