Help! Pull Start Screws!

[Richard]

Hi,

I got this OS engine 0.15 CV, I found all the screws are gone except one. As advised by some pple here, I went down to pan sin at kitchener complex, the aunite say dun haf... how? pls advise!!

I download the manual from OS website and found its M2.6X 7.

[haowee]

screw for the pull start lost then dun use pull start lor.

[xiaober]

I think you can get the screws from this web site:

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXJVG6&P=7

But it is temporary out of stock. Will arrive late Sept.

You can also search the web for this stock number: LXJVG6

Good Luck!!!

[Icon]

Hi,

I got this OS engine 0.15 CV, I found all the screws are gone except one. As advised by some pple here, I went down to pan sin at kitchener complex, the aunite say dun haf... how? pls advise!!

I download the manual from OS website and found its M2.6X 7.

Think Hoby Bug has them.

[eleewhm]

Hi,

I got this OS engine 0.15 CV, I found all the screws are gone except one. As advised by some pple here, I went down to pan sin at kitchener complex, the aunite say dun haf... how? pls advise!!

I download the manual from OS website and found its M2.6X 7.

you the one who was at rotor asking auntie about the screw??...i think i saw you.... Thursday

[eleewhm]

another place you can try is singapore hobby...they are the distro for OS engine..they keep some spares

[sspp]

Hi,

I got this OS engine 0.15 CV, I found all the screws are gone except one. As advised by some pple here, I went down to pan sin at kitchener complex, the aunite say dun haf... how? pls advise!!

I download the manual from OS website and found its M2.6X 7.

as advised by the rest, try some hobby shops, they should have. Another thing, if the screws goes to the crank case, loctite it.

[Mad Armour]

Hi,

I got this OS engine 0.15 CV, I found all the screws are gone except one. As advised by some pple here, I went down to pan sin at kitchener complex, the aunite say dun haf... how? pls advise!!

I download the manual from OS website and found its M2.6X 7.

Can try M2.5 x 8.

[Richard]

you the one who was at rotor asking auntie about the screw??...i think i saw you.... Thursday

Yes.. I was there.. got 2 guys there.. you the tall one is it??

[Richard]

as advised by the rest, try some hobby shops, they should have. Another thing, if the screws goes to the crank case, loctite it.

Bought it 2nd hand... New to nitro, so i nv check that part till i run first time, realise the damn screws are gone and I am screwed.. luckily, i bargin the price down or really not worth my $$ and time to replace these stuff..

[Richard]

Can try M2.5 x 8.

thats wat the auntie at pan sin told me.. might work but can spoil the screw thread on the engine.. too risky.

[neo]

i do buy from pan sun . they have 2.6mm screw one for a dollar. mine is 2.6mm x 15 u wan can cut short it

[Richard]

i do buy from pan sun . they have 2.6mm screw one for a dollar. mine is 2.6mm x 15 u wan can cut short it

maybe I can go down again tomolo. to ask M2.6 x15. Thanks,

[sspp]

maybe I can go down again tomolo. to ask M2.6 x15. Thanks,

take out the screw that you are left with and bring to pan sun and show it to them

[Richard]

take out the screw that you are left with and bring to pan sun and show it to them

Bro, thats wat i did last week. the auntie search high and low and said dun haf.. I will try wat neo has mentioned