Announcement
Collapse
No announcement yet.
micro hpi rs4
Collapse
X
-
Originally posted by zattan22but the video showing the speed is like a 1/10
thats very good
do you know anyone having the cnc machine
i wish to cut the 540 motor mod only
wonder if it works
IMO, going for 540 motor is not the right way to go as weight will always be an issue. If you want pure speed (uncontrollable type), a Mamba 8000 will do nicely.For some people it's important to show what they have, for others it's sufficient to know that they have it.
Comment
-
Originally posted by zattan22but how much is a manbo 8000??
Check here.
There was a further 5% off but I think you just missed it. Ends 11.99pm 30/05/07 USA time.For some people it's important to show what they have, for others it's sufficient to know that they have it.
Comment
-
Originally posted by zattan22but how much is a manbo 8000??Modded Esavage + 4S lipo + KB45 2300KV + HW150A
Brushless Esky Lama with dual swash
Esky Dauphin
Walkera Lama 2
Walkera 5G6
Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
Brushless Mini LST + single servo mod
Brushless Micro-T
Comment
-
Originally posted by LittleGiantI think wraith 7K is better for heavy vehicles like mini lst.
MT needs torque rather than speed, so IMO, a 4200 will be more suitable, max 5400.For some people it's important to show what they have, for others it's sufficient to know that they have it.
Comment
-
Originally posted by Mad ArmourI think you won't be able to control your Mini LST with 7K, assuming you can find a way to hook up the motor. It's a 2 motor config, right?
MT needs torque rather than speed, so IMO, a 4200 will be more suitable, max 5400.
Wraith 7K has high torque as well as speed. But the downside is that the run time will be lesser.Modded Esavage + 4S lipo + KB45 2300KV + HW150A
Brushless Esky Lama with dual swash
Esky Dauphin
Walkera Lama 2
Walkera 5G6
Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
Brushless Mini LST + single servo mod
Brushless Micro-T
Comment
-
Originally posted by LittleGiant4200 is very very slow even with 3s and 23/54 gearing....
Of course 3s with a 7000kv motor will be much much faster but control will be an issue.
I think it boils down to wat you want out of the system.For some people it's important to show what they have, for others it's sufficient to know that they have it.
Comment
-
Originally posted by Mad ArmourYou tried the setup before? 3s...that's 11V at least, and that's >46000rpm. Maybe I'm getting too old liow. Hahahahaha.
Of course 3s with a 7000kv motor will be much much faster but control will be an issue.
I think it boils down to wat you want out of the system.Modded Esavage + 4S lipo + KB45 2300KV + HW150A
Brushless Esky Lama with dual swash
Esky Dauphin
Walkera Lama 2
Walkera 5G6
Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
Brushless Mini LST + single servo mod
Brushless Micro-T
Comment
-
Originally posted by zattan22okie.......
found out that by using quack33.......i could do the brushless thing too
but wat batt should i use??? lipo?? 2s or 3s??
any good brushless motor recommendation in singapore??
2s or 3s depends on wat speed you want.Modded Esavage + 4S lipo + KB45 2300KV + HW150A
Brushless Esky Lama with dual swash
Esky Dauphin
Walkera Lama 2
Walkera 5G6
Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
Brushless Mini LST + single servo mod
Brushless Micro-T
Comment
Comment