Tt Zk2 1 18mt

[alex_bong]

see the review here:

http://www.yourmicro.com/forums/showthread.php?s=&threadid=15874

I saw a fren played it stock perform very well! it's look like mini size MGT/MTA4.

Features:

Super Combo includes everything you need, no extras to buy.
Equipped 370 stock motor.
PPM/AM 2-channel Ace R/C RS radio system with pistol controller
Digital IC decoder integrates receiver and ESC functions.
Automatic Throttle Lock (A-T-L) prevents potential dangerous caused by incorrect switching operations. (Come with ACE R/C T2P pistol grip transmitter only.)
Three-gear transmission with 1/10th grade differential.
Fully independent suspension w/ oil filled shocks.
Race tough composite parts.
Powerful 1100mAh, 6-cell rechargeable NiMh power packs with overnight AC charger included.
Replaceable micro size servo.
Includes All These Components:

2ch transmitter pistol grip
RX and speed control
370 motor
Rechargeable NiMh Power Pack
AC Wall Battery Charger(230V)
Micro Servo

[alex_bong]

pic fr web

some pics....

[alex_bong]

compared

today realized that this little 2wd truck is faster than half8 in stock form.
SO...... 2wd doen't mean slower!!!

[alex_bong]

TT ZK2 ZT2 movie

See the movie here!!! , finally uploaded. hehehe......

http://www.daddyhobby.com/gallery/showphoto.php?photo=1552&cat=500&ppuser=501&sortby=f&sorttime=999&way=asc

[alex_bong]

i tried...

1 word: FUN!!

this little thing wheelie in stock mode! and strong enough to stand my bashing!! local stock RTR combo is powered by 280 motor but it's wheelie liao!

the only not so good is the 2 in 1 RXESC the BEC kick in quite fast than the steering begin gliching , as good as mini-T or even better!

here some pics show the MT and the mini steering servo with servo saver

[alex_bong]

pics....

somemore....and compare it to Tamiya 1/10 mini cooper

[alex_bong]

soo Fast.....

this MT with 67T spur is soo fast and love to wheelie with bl and 11, 12(stock), 13T pinions.

i bought 11 and 13T HPI Micro RS4/minizilla pinion to replace the stock 12T to test how the ZK2 perform, they fit perfectly . and the result is awesome

See my other post:

http://www.daddyhobby.com/forum/showthread.php?t=13812

[alex_bong]

1st test run done!

It's ZK2, from Thunder Tiger, same manufacturer as the Raptor nitro heli.
So quality is there! similar to mini-T but i get it from Malaysia Frenz, basic parts hv . local TT dealer:ROTOR didn't bring in this model See this:

http://www.daddyhobby.com/forum/showthread.php?p=137352#post137352

So far i slammed it once in to the real car tire that park by the side of the driveway when 1st test run my bl setup , at full speed in bl setup
Amazingly only the front bumper bent a little on the composite plastic and 2 of the holding screws , i just remove these parts and bent it back to ori shape, everything is done. with that kind of speed i can say it is tough

Next move i will custom make a wheelie bar for it (a must mod for bl setup), cause in bl setup this little MONSTER REALLY LIKE TO WHEELIE A LOT! the real bumper now is full of scratches and will make also a custom plate to reposition the electronics.

[alex_bong]

new ESC...

Fr Nosram: Hawk Power Reverse.(for brush motor)

micro size and fit in the truck nicely with sanwa micro rx side by side.....

no brushless now cause i fried mine BL ESC .

now it's power by this new esc and tamiya tem-tech motor.

[HBT]

Fr Nosram: Hawk Power Reverse.(for brush motor)

micro size and fit in the truck nicely with sanwa micro rx side by side.....

no brushless now cause i fried mine BL ESC .

now it's power by this new esc and tamiya tem-tech motor.

Hi Alex,may i know where you bought and how much is the Nosram brush esc?
my stock esc burning hot after i changed to stampede tyre

[alex_bong]

???

u mean u use stampede tire 4 the 1/18 mt ??

anyway it's bought fron Tai Seng.

[HBT]

yah,traction much better though