Dear All;
I have made an order from this site in the US called www.rcsuperstore.com for a Proboat Shockwave for US$249.99, and shipping for US$44.70 (surface economy).
You can go to Ebay and buy from them too, but at US$279, which is still cheaper than others selling at US$349. They have 100% feedback and are paypal verfied, so should be okay. I also called and spoke to them over the phone.
Shipping cost is reasonable too. (package is about 20lb, I checked it up at Proboats)
Below are some info on the Shockwave 36. As I opted for surface economy mail, gotta wait for minimally 1.5 mths.....nevertheless, good things need to wait....
Shockwave 36 RTR Nitro Deep V R/C Boat N.I.B.
The Shockwave 36 measures 36 inches in length and is powered by a water-cooled Dynamite .32 Marine engine w/ pull-start and controlled by a JR radio system, this boat comes pre-assembled.
The hull is built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Prather prop add even more ride-tuning options.
Features:
*
Prather propeller
*
Stainless steel and aluminum running hardware
*
JR Python radio system
*
Water-cooled Dynamite .32 Marine engine w/ pull-start
*
Pre-painted fiberglass hull
*
Speeds of up to 35 mph
*
Completely ready-to-run
Specifications:
*
Length: 36 in.
*
Beam: 9 in.
*
Engine Size: .32 water-cooled Marine
*
Weight: 6.25 lbs.
*
Speed: 30 m.p.h.
*
Radio: 2 channel
*
Hull Material: fiberglass
*
Trim Scheme Colors: white
*
Prop Size: 1.90x3.0 in.
*
Hull Type: Deep-V
*
Kit/RTR: RTR
*
Drive System: Flex shaft
*
Exhaust: Tuned pipe
I have made an order from this site in the US called www.rcsuperstore.com for a Proboat Shockwave for US$249.99, and shipping for US$44.70 (surface economy).
You can go to Ebay and buy from them too, but at US$279, which is still cheaper than others selling at US$349. They have 100% feedback and are paypal verfied, so should be okay. I also called and spoke to them over the phone.
Shipping cost is reasonable too. (package is about 20lb, I checked it up at Proboats)
Below are some info on the Shockwave 36. As I opted for surface economy mail, gotta wait for minimally 1.5 mths.....nevertheless, good things need to wait....
Shockwave 36 RTR Nitro Deep V R/C Boat N.I.B.
The Shockwave 36 measures 36 inches in length and is powered by a water-cooled Dynamite .32 Marine engine w/ pull-start and controlled by a JR radio system, this boat comes pre-assembled.
The hull is built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Prather prop add even more ride-tuning options.
Features:
*
Prather propeller
*
Stainless steel and aluminum running hardware
*
JR Python radio system
*
Water-cooled Dynamite .32 Marine engine w/ pull-start
*
Pre-painted fiberglass hull
*
Speeds of up to 35 mph
*
Completely ready-to-run
Specifications:
*
Length: 36 in.
*
Beam: 9 in.
*
Engine Size: .32 water-cooled Marine
*
Weight: 6.25 lbs.
*
Speed: 30 m.p.h.
*
Radio: 2 channel
*
Hull Material: fiberglass
*
Trim Scheme Colors: white
*
Prop Size: 1.90x3.0 in.
*
Hull Type: Deep-V
*
Kit/RTR: RTR
*
Drive System: Flex shaft
*
Exhaust: Tuned pipe
Comment