i-Charger 106B+ Help needed.

[Instinctloh]

Hi,

I just bought a charger n I'm not sure if I miss out any settings which I need your help.

I have posted a video how the charger response when I start the charging thus hopes that you guys can assist to solve this.

VIDEO

[raidor88]

I also own the same unit. Never done any special setting. Maybe yours is a faulty unit.

[Instinctloh]

More info

A bit more info on my issues.

After setting to balance lipo n set the correct batt size, by right by pressing n hold onto the start button, the charger shld start charging but it show some info on screen ( as shown in the clip ) then back to ready mode.

Anyone can help or are there any other settings that I need to take note in order to charge the batt?

Appreciate your help.

[Instinctloh]

I also own the same unit. Never done any special setting. Maybe yours is a faulty unit.

Huh

Dun scare me leh.

Think I go back n try to charge other types of batt cos if I can charge a lithium batt then is definitely not charger issue.

Praying v hard now!!!

Thks

[mh3400]

http://www.youtube.com/watch?v=nRMMFT2ovZs&feature=related

maybe try to see this clip and see any setting might miss out.
sorry i do not own this charge.

[jtchoy]

What's your input power source? 12V adaptor?

Looks like either problem with the input voltage causing it to reboot or could be the icharger faulty. Try to troubleshoot with a lower charge current and different input power source if possible.

I have the same iCharger. Very good and reliable charger.

[Instinctloh]

Wah lau.

Dun tell me really spoilt!!!

I really at wits end cos I tried all the settings but .....
Shucks. !!!!

[jtchoy]

Wah lau.

Dun tell me really spoilt!!!

I really at wits end cos I tried all the settings but .....
Shucks. !!!!

So what is your input power source?

Even if you try very low charge rate like 0.1A is still resets?

[Instinctloh]

What's your input power source? 12V adaptor?

Looks like either problem with the input voltage causing it to reboot or could be the icharger faulty. Try to troubleshoot with a lower charge current and different input power source if possible.

I have the same iCharger. Very good and reliable charger.

Huh????

Very chim!!!

Let me try n see if I can lower the charge current.

[Instinctloh]

So what is your input power source?

Even if you try very low charge rate like 0.1A is still resets?

Bro really sorry cos im still trying to figure it out how tO set.

Do I press the setting ?

[Instinctloh]

It says input limit 22.0 & cut off 10.00v

Is this correct?

[vintcs]

i think its faulty. get it change. it should charge once u press the start button.

[vintcs]

or try to use a different power source.

[jtchoy]

It says input limit 22.0 & cut off 10.00v

Is this correct?

This setting is correct, but at the charging screen before you press start, can you change that from 2.2A to 0.1A and test?

What is your power source to power the charger? AC adaptor? What rating?

[sherchoo]

Bro,

My suspicion it is the power supply. What is the current (ampere) rating on your power supply?

I can help you confirm if you don't mind dropping by my place. SMS me