Switching Mode Multi Power Supply 20A

[HotDogBun]

Need some expertise on the title.
Switching Mode Multi Power Supply 20A

I am using 2 x Hyperion EOS0610iNet ( 250 Watts max output ).
Lipos to be charge are 6s5000mAh.
Desirable charging amp at 1C ( 5A ).

Will the mentioned PSU be able to supply BOTH chargers to charge two mentioned lipos at the same time BOTH at 1C ( 5A ) ?

Thanks in advance.

[khatiban]

the power supply can provide a maximum power of 300W @ 15V,20A

so for charging voltage of 6s lipo at 5A that would probably require a power consumption of 111W ~ 126W, excluding the additional power consumed by the charger itself.

So for a worst-case situation, the two chargers would draw about 222W ~ 252W to charge.

Assuming the chargers' internal voltage converters are only 75% efficient you'll most probably exceed the 300W limit.

[HotDogBun]

Khatiban, thanks.
So that means the PSU will not be able to run my two chargers at same time charging two 6s5000mAh at 5A.

Thats sad.