Announcement

Collapse
No announcement yet.

Lipo Used For Your Trex 500

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jansonfinn
    replied
    Originally posted by Nazar78 View Post
    ya man, dont noe car oso very poisonous.

    broe my fingers oso not straight, but some tips/cheats last time i did to make it straight lol;

    openup tx and;

    cyclics/rudder; by means of extra spring/buildin tension, increase stick tension till comfortable not hitting other unwanted movements. after this, who need expo?

    throttle; make it very smooth, also add some resistance at the center stick. very useful for maneuvers requiring 0 pitch. no worries from 14deg immediately to 0deg w/o shooting off extra pitch...
    wah, won't it be dangerous if the job is not done properly? i.e stick jam halfway during flight?

    Leave a comment:


  • Nazar78
    replied
    Originally posted by nacar View Post
    Yo bro. Long time no see. Now I see you kena poisoned by car

    I progressing very slowly. Can do tail down tick tock only. But tick tock continously 4 to5 times and the heli wants to fly away. Think my fingers not straight Now also just learning inverted head in hovering. But must use MT and my Gaui 200v2 to train. T500 too stable for training hovering, can sleep
    ya man, dont noe car oso very poisonous.

    broe my fingers oso not straight, but some tips/cheats last time i did to make it straight lol;

    openup tx and;

    cyclics/rudder; by means of extra spring/buildin tension, increase stick tension till comfortable not hitting other unwanted movements. after this, who need expo?

    throttle; make it very smooth, also add some resistance at the center stick. very useful for maneuvers requiring 0 pitch. no worries from 14deg immediately to 0deg w/o shooting off extra pitch...

    Leave a comment:


  • jansonfinn
    replied
    Originally posted by nacar View Post
    Yo bro. Long time no see. Now I see you kena poisoned by car

    I progressing very slowly. Can do tail down tick tock only. But tick tock continously 4 to5 times and the heli wants to fly away. Think my fingers not straight Now also just learning inverted head in hovering. But must use MT and my Gaui 200v2 to train. T500 too stable for training hovering, can sleep
    Do u have the tendency to push the rudder stick while doing the tail down tick tock? My tail will always move 1 side. I suspect my fingers are also not straight

    Leave a comment:


  • nacar
    replied
    Originally posted by balance_mind View Post
    long time no see bro, see tat u r progressing well.

    25C is already gd 4 many many maneuvers with e stock motor or even e scorpion 1600. 4 my case, it's e pilot limitation.
    Yo bro. Long time no see. Now I see you kena poisoned by car

    I progressing very slowly. Can do tail down tick tock only. But tick tock continously 4 to5 times and the heli wants to fly away. Think my fingers not straight Now also just learning inverted head in hovering. But must use MT and my Gaui 200v2 to train. T500 too stable for training hovering, can sleep

    Leave a comment:


  • balance_mind
    replied
    Originally posted by nacar View Post
    For me, who can only do tick tock, 25c is good enough.
    long time no see bro, see tat u r progressing well.

    25C is already gd 4 many many maneuvers with e stock motor or even e scorpion 1600. 4 my case, it's e pilot limitation.

    Leave a comment:


  • jansonfinn
    replied
    Originally posted by Lplate View Post
    I still in the middle of building my trex500 heheh. For me no choice. Limited budget so gonna just use 3s x 2 lipos.

    Some people say actually its only the series connector that kinda brings down the power compared to 6s cos of the resistance in long wiring.

    So I was thinking I will not buy those readymade series connectors that look so long. Shorter wires got less resistance so maybe I will make one stumpy short wired series connector of my own. Maybe you can try that first also.
    haha, let me know how's the result. My Trex500 is not even here yet.

    Leave a comment:


  • jansonfinn
    replied
    Originally posted by nacar View Post
    For me, who can only do tick tock, 25c is good enough.
    thanks for the info!

    Leave a comment:


  • Lplate
    replied
    I still in the middle of building my trex500 heheh. For me no choice. Limited budget so gonna just use 3s x 2 lipos.

    Some people say actually its only the series connector that kinda brings down the power compared to 6s cos of the resistance in long wiring.

    So I was thinking I will not buy those readymade series connectors that look so long. Shorter wires got less resistance so maybe I will make one stumpy short wired series connector of my own. Maybe you can try that first also.

    Leave a comment:


  • PAFB
    replied
    Originally posted by jansonfinn View Post
    There was a debate here on using 2 x 3S or 6S better, u can search for them.
    As for the charging, it is better to charge as 6S if u want to use it on the 500. But for the 450, it doesn't matter

    OK, thanks

    Leave a comment:


  • nacar
    replied
    Originally posted by jansonfinn View Post
    But is 25C good enough?
    For me, who can only do tick tock, 25c is good enough.

    Leave a comment:


  • jansonfinn
    replied
    Originally posted by PAFB View Post
    I need to buy some more Lipos for my 450 but would like to use them for a 500 later, is there any disadvantage to use 2 X 3s over a 6s? How do you charge them? As a 6s or seperately?
    There was a debate here on using 2 x 3S or 6S better, u can search for them.
    As for the charging, it is better to charge as 6S if u want to use it on the 500. But for the 450, it doesn't matter

    Leave a comment:


  • Lplate
    replied
    Whatever lipo you use, you may also wanna consider the weight for COG on both your 450 and 500 heli.

    Leave a comment:


  • PAFB
    replied
    Originally posted by sbc View Post
    We have tried 2 x 3S FP2500 25C. Power is better that the Align 6S. Or you could try 6S FP2500 25C. Same result. Reason for using 2x3S is because of Trex450.

    I need to buy some more Lipos for my 450 but would like to use them for a 500 later, is there any disadvantage to use 2 X 3s over a 6s? How do you charge them? As a 6s or seperately?

    Leave a comment:


  • jansonfinn
    replied
    Originally posted by HotDogBun View Post
    You may want to try out Skyhobbies's Desire 6s1p/2500mAh/25C. Its lighter by about 60g from Vplus if their stated weight is true.
    But is 25C good enough?

    Leave a comment:


  • HotDogBun
    replied
    For Vplus 6s1p/2600mAh/30C, it is usable.
    Personally, how everyone rates the lipo is very subjective because they have different expectations, length of usage, and skills, to really give a good gauge.

    I have gone through 25 cycles on 2 of them and 5 on the 3rd I have. So far they go for 4½min flights for my normal routine. Recently I can stretch to slightly above 5min because I'm learning piro flights so do nothing but piro.
    The results will be 3.72-3.76 per cell after flight.

    Of the 50+ flights I had, never had I any cells unbalanced, and I dont balance charge, instead as usual I'll charge via dean.

    As of now I won't say this lipo is confirm worth the money, till I hit 70 flights then would I say that.
    However pls note for the same lipo, by a different hand for example do nothing but punch up and down the entire 4min flight, the results will be different.

    Leave a comment:

Working...
X