how to discharge NiMH using Tahmazo T15 or similar charger like BC6/BC8.
I have 2 Sanyo 2500mAh, set to discharge at 0.10A(minimum value) and I
set the voltage to 2.4v. is this the correct way?
I don't know how much do I need to put the current and the voltage
if I want to discharge 2 NiMH batteries.
Here is my settings:
current = 0.10A (set on the charger)
voltage = 2.40v (set on the charger)
then only 2 minutes my charger will stop discharging. the amount of discharge
(shown on the charger's LCD) is only "00004". means is only 4mah.
I have 2 Sanyo 2500mAh, set to discharge at 0.10A(minimum value) and I
set the voltage to 2.4v. is this the correct way?
I don't know how much do I need to put the current and the voltage
if I want to discharge 2 NiMH batteries.
Here is my settings:
current = 0.10A (set on the charger)
voltage = 2.40v (set on the charger)
then only 2 minutes my charger will stop discharging. the amount of discharge
(shown on the charger's LCD) is only "00004". means is only 4mah.
Comment