Announcement

Collapse
No announcement yet.

Some funny thing about my lipos.

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Some funny thing about my lipos.

    I have an Etec 2 cell 1250 mah rated at 12C and a stock 800mah Esky lipo rated at 10C.

    However when I tried the Etec lipo on my Lama V3, what I realised is that the uplift force generated by my lama is not as powerful as the stock 800mah Esky lipo.

    I held the lama in my hand then I punched up the throttle stick. The difference is very significant.

    My question is, the Etec lipo rated at 12 C should be able to sustain a higher current than the stock Esky lipo right? Is the Etec lipo overrated at 12C??
    Modded Esavage + 4S lipo + KB45 2300KV + HW150A
    Brushless Esky Lama with dual swash
    Esky Dauphin
    Walkera Lama 2
    Walkera 5G6
    Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
    Brushless Mini LST + single servo mod
    Brushless Micro-T

    #2
    Forgot to mention that both lipos are charged with the same charger and has the same charged voltage.
    Modded Esavage + 4S lipo + KB45 2300KV + HW150A
    Brushless Esky Lama with dual swash
    Esky Dauphin
    Walkera Lama 2
    Walkera 5G6
    Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
    Brushless Mini LST + single servo mod
    Brushless Micro-T

    Comment


      #3
      Bro,the weight of your battery do play a part too.

      Comment


        #4
        Originally posted by Hazy
        Bro,the weight of your battery do play a part too.

        Hmm 10g difference should not be that much right?

        AnywayI was holdin the heli in my hands when I increase the throttle. The uplift force I can feel is very different. The uplift with the stock lipo is much stronger. Does this mean that I have a bad lipo?
        Modded Esavage + 4S lipo + KB45 2300KV + HW150A
        Brushless Esky Lama with dual swash
        Esky Dauphin
        Walkera Lama 2
        Walkera 5G6
        Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
        Brushless Mini LST + single servo mod
        Brushless Micro-T

        Comment


          #5
          what connectors are being used?
          For sale






          trex 700/ 12mm main shaft swash leveller. carbon type $22 only new

          Comment


            #6
            Originally posted by johndyl
            what connectors are being used?
            The one that came with the lama.

            JST connectors??
            Modded Esavage + 4S lipo + KB45 2300KV + HW150A
            Brushless Esky Lama with dual swash
            Esky Dauphin
            Walkera Lama 2
            Walkera 5G6
            Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
            Brushless Mini LST + single servo mod
            Brushless Micro-T

            Comment


              #7
              maybe your motors are burning out?

              Comment


                #8
                Originally posted by chinbqs
                maybe your motors are burning out?
                cant be, with the other batt it was ok..


                maybe the connector is not done properly or maybe u really have a faulty batt
                For sale






                trex 700/ 12mm main shaft swash leveller. carbon type $22 only new

                Comment


                  #9
                  Originally posted by johndyl
                  cant be, with the other batt it was ok..


                  maybe the connector is not done properly or maybe u really have a faulty batt
                  But it doesn't warm up like the stock esky lipo....

                  Funny right? Maybe it is the connector. I will get a new connector and try again.

                  BTW it is 1250mah not 1000mah.
                  Modded Esavage + 4S lipo + KB45 2300KV + HW150A
                  Brushless Esky Lama with dual swash
                  Esky Dauphin
                  Walkera Lama 2
                  Walkera 5G6
                  Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
                  Brushless Mini LST + single servo mod
                  Brushless Micro-T

                  Comment


                    #10
                    Originally posted by LittleGiant
                    But it doesn't warm up like the stock esky lipo....

                    Funny right? Maybe it is the connector. I will get a new connector and try again.

                    BTW it is 1250mah not 1000mah.
                    Bro does yr lipo batt feel warm after flying...mine warm up...heard that is no good for a lipo batt to be warm...

                    Comment


                      #11
                      Originally posted by mtyw8888
                      Bro does yr lipo batt feel warm after flying...mine warm up...heard that is no good for a lipo batt to be warm...

                      No it doesn't warm up.... but the heli can only lift off on ground effect. I flew it for about 5 min but yet it doesnt warm up at all. It can only fly on groudn effect as the lift produced isnt' as much as the stock 800mah 10c lipo.
                      Modded Esavage + 4S lipo + KB45 2300KV + HW150A
                      Brushless Esky Lama with dual swash
                      Esky Dauphin
                      Walkera Lama 2
                      Walkera 5G6
                      Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
                      Brushless Mini LST + single servo mod
                      Brushless Micro-T

                      Comment


                        #12
                        Originally posted by LittleGiant
                        No it doesn't warm up.... but the heli can only lift off on ground effect. I flew it for about 5 min but yet it doesnt warm up at all. It can only fly on groudn effect as the lift produced isnt' as much as the stock 800mah 10c lipo.
                        Maybe another thing is yr 1250mah batt is kind of heavy..infact the 12c compare to 10c doesnt make much diffs..the higher mah will onli have a longer fly time...

                        Im currently using Xtreame 850mah 18c - 20c, the power and punch is so much diffs compare to the 12c / 10c

                        My batt onli feel warm if i fly more then 10mins non-stop..

                        BTW where do u live maybe can join u for a fly..

                        Comment

                        Working...
                        X