If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I do not see why not.
Tried on the evo batt before where the connector does not really fit well.
Just make sure you plug it in correctly and good contact on both.
(Anyway, there'll be an alarm if you reversed the polarity)
_____________________________________________ "Success is the ability to go from failure to failure without losing your enthusiasm." "Great works are performed, not by strength, but by perseverance."
Finally get to solve the problem. must get a adapter connector solder to the other connector which be put together with the thunder batt and connects to the ALIGN balancer charger.
Benedict Gary Nothing's Too Small To Know And Nothing's Too Big To Attempt !
May i know this battery need how many hours of charging
with ESKY Charger EK2-0851 ?
Many Thanks...
1 hours 15min like tat
V.s.One =Sold
Sepent 710x2 =Trown By Ex G.f
Honey Bee C.P =Useless Merry Go Round
Lama V3 For Me =Vigin Heli
HoneyBee Fp =Crashed
HoneyBeeKing =Looped and flipped sold
Belt Cp =Sold
DFC Pro (Clone) = Trying to set up Gyro
V450D01V2 = Flying With 2 New Buddy
JS Tz Frenzy 50 = Overhauing
Raptor 60 = Fliping Crazily & Total Gone
that's the balance charger iznt it?
it charges at 0.8A.. if your batt is 1000mAh (or 1Ah), you will take approx (1 divided by 0.8) hours to charge fully... well, just slightly over 1 hour lor
i take almost 2 hours to fully charge my 1200mAh batteris with the balance charger.. and almost 3 hours to charge my 1800mAh 3 cell for my Belt CP. its a pain to charge batts actually...
but the joy comes later when u fly.. esp my estarter. one pack keeps it up in the sky for like 15 mins or so.. shiok ... wait till i upgrade to brushless i think i can fly till my legs go soft
Comment