Help on Tahmazo T26 charger

[khpan2003]

Hi, anyone can help me on this?

I have a Tahmazo charger. It state able to charge Li-Po batt... but i try to select the batt type, but it only show NiCD, NiMh and LiIo...

Is the LiIo = Li-Po?

Thanks..

[Artyspec]

Hi, anyone can help me on this?

I have a Tahmazo charger. It state able to charge Li-Po batt... but i try to select the batt type, but it only show NiCD, NiMh and LiIo...

Is the LiIo = Li-Po?

Thanks..

if it is like the T15, go to li ion. press next next(to discharge then to batt type). press enter or something like tat to change to lipo.

[khpan2003]

Hi Artyspec, thanks. will try now to see if it work

[khpan2003]

um... try already.. only Li-ion batt display only..
Not sure it this is the one as same for charging Li-Po. As this charger is able to charge Li-Po batt... but even read thru the user manual, there is states show it can be use for Li-Po.. but read the manual again and again, they never show the step to switch to Li-Po
Only show up to Li-Io

[madflurry]

i think you can use Li-Lo to charge ur lipos.. as my triton also doesnt have a lipo mode. But a Li-Ion mode. The manual says use the Li-Ion to charge lipos. So i guess they're the same. But nonetheless T26 is a different charger from the triton so there might a function to change to lipo? Not quite sure

[Artyspec]

Triton allows u to select voltage under Li-ion. It allows u to select 3.6/3.7/7.2/7.4/10.8/11.1/14.4/14.8. Lipos use the multiples of 3.7.

[khpan2003]

Found out from the seller al;ready. The Li-Io can be use for Li-Po as well
So.. had get my lipo batt charged using this charger
Better charging then my other charger.