Announcement

Collapse
No announcement yet.

Prop Recommendation for Ehawk 1500

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Confusing updown theories.. should post in Darwin's thread..

    Actually there is no relation of stick movement to elevator movement.

    Some people prefer to use stick push forward to climb the plane while most would agree the stick pull back is climb..

    Former is due to old computer gaming using arrow direction keys to make plane go UP and down... up key is fly up, down key is fly down.

    I know where some people coming to.. OK I confusing alot of people now...
    I'm Remotely Controlled ...

    Comment


      #77
      Bun,

      The sketch is meant for mode 1 V-tail glider with ailerons. For a V-tail glider without ailerons and uses ruddervators for roll control, aileron stick and channel should be used instead of rudder channel.

      Comment


        #78
        Yup, it applies to Ehawk.
        Should I mix my ruddervator with ailerons?
        I was thinking if some have true claims about ineffective rudder, then maybe mixing with alierons might help? Though I worry glider will tend to dive when I rudder input.

        Comment


          #79
          Originally posted by HotDogBun View Post
          Yup, it applies to Ehawk.
          Should I mix my ruddervator with ailerons?
          I was thinking if some have true claims about ineffective rudder, then maybe mixing with alierons might help? Though I worry glider will tend to dive when I rudder input.
          I normally couple the rudder function to the ailerons. It makes turning much better. Anyway, most transmitter has a coupling switch to couple/uncouple them.

          Comment

          Working...
          X