Announcement

**JET 99** · 05-03-2012, 06:31 PM

Deae Adrianli,

I showed your new project to my friends.they are very interested about it.

Do you have any new pictures ?

JET

**Adrianli** · 06-03-2012, 08:01 AM

Sorry, no new pictures. I have been busy fixing my helis so work on this boat has come to a complete stop.

**JET 99** · 06-03-2012, 01:34 PM

Good morning,

thanks for your answer. We will wait.

have a nice day

JET

**stathis** · 15-03-2012, 10:03 PM

Hi Adrianli,
I am planing to buy a rc gas boat and I was thinking about the dragon saga or snap. I live in china now and you can get these boats here for less than 500 USD including the 26cc zenoah clone (I know its crap).You can have a look here
The cat is popular outside china and I have found plenty info, there are also 2 versions by venom but the snap doensn't seem to be sold in europe or US, I have only found the smaller electric one. I think that the cat looks better but I have seen it flips very easily so maybe the mono is more suitable for me as I am planing to use it at sea. According to the specs it's 142cm long and 23.5 cm wide, is that true? seems very narrow. Also the bow is different from the original and the electric version. I would love to see more pics and a vid of your boat when it's ready!

**Adrianli** · 16-03-2012, 08:10 AM

Originally posted by stathis View Post

Hi Adrianli,
I am planing to buy a rc gas boat and I was thinking about the dragon saga or snap. I live in china now and you can get these boats here for less than 500 USD including the 26cc zenoah clone (I know its crap).You can have a look here
The cat is popular outside china and I have found plenty info, there are also 2 versions by venom but the snap doensn't seem to be sold in europe or US, I have only found the smaller electric one. I think that the cat looks better but I have seen it flips very easily so maybe the mono is more suitable for me as I am planing to use it at sea. According to the specs it's 142cm long and 23.5 cm wide, is that true? seems very narrow. Also the bow is different from the original and the electric version. I would love to see more pics and a vid of your boat when it's ready!

The width at transom is abt 31cm. The overall length from bow tip to transom is 142cm.

If you are running in sea with waves, better to get a mono hull. Running a cat hull with waves, have to control ur throttle to prevent blowover.

**stathis** · 16-03-2012, 09:40 PM

Thanks for your reply. I'll probably go for the snap.
Good luck with your project!

**JET 99** · 04-05-2012, 09:38 PM

Hi Adrianli,

Are you still fixing your helis or did you work on your boat ?

JET

**Adrianli** · 07-05-2012, 08:06 AM

Originally posted by JET 99 View Post

Hi Adrianli,

Are you still fixing your helis or did you work on your boat ?

JET

Still not done with fixing my helis. I have eight of them.

Work on boat is stand still.

**Adrianli** · 07-05-2012, 08:09 AM

Thinking of how to seal the various vent holes.:rolleyes3:

**JET 99** · 07-05-2012, 01:06 PM

Originally posted by Adrianli View Post

Thinking of how to seal the various vent holes.:rolleyes3:

[ATTACH=CONFIG]112518[/ATTACH]

[ATTACH=CONFIG]112519[/ATTACH]

[ATTACH=CONFIG]112520[/ATTACH]

Good morning,

As i can see in the pic above, you don't like helis

. Let me check with my friends fot the vent holes. Few of them did it.

JET

**JET 99** · 07-05-2012, 02:33 PM

Hi Adrianli,
Ok, I hope you'll understand my explanations because my english become worse and worse.

You seal the vent holes outside with adhesive tape ( the one in tissue ), inside you put glass fiber tissue + resin. let it dry. you remove the tape. after you use sand paper on the fiber glass tissue and after painting.

JET