Selling a custom newly assembled D.kossel. Get it fast before its gone again and it will take awhile before i will have free time to build 1.
An intermediate level 3D printer, for entry level users wanting to learn and understand the hardware and software functions of 3D Printing. The printer is fully assembled and operational, and has been lightly used for testing and calibration purpose only.
I can demonstrate the printer in operation, and could provide some hours of advice and information as to using the printer, software, and various software functions. The printer can also be shown with the uses of 3D softwares.
Model : Delta 3DP Customs
State : Fully assembled, fully operational, working to spec
Print plate size : 200 diameter, glass bed
Build platform : 200mm by 200mm by 250
Filament size : 1.75mm
Single extruder : 0.4mm
Material capabilities : ABS, PLA, and others
Type : Delta, open frame
Layer resolution : 100 microns
Placement accuracy : 5 microns
Printing modes : Solid, honeycomb, hollow
Extruder temperature range : 170C to 250C verified
Connection : USB 2.0 or higher
Power : 110V/220V AC
Auto bed tramming / leveling
Manufacturer supplied software : Easyprint, RepRap, Skeinforge and Slic3r slicing software, USB driver
Input file type : STL files
Various free software programs for support use and STL viewing
Operating system : Windows or Linux
Computer requirements : 1.8Ghz or higher, 1GB RAM memory
Documentation : Manufacturer user startup and operating instructions
User assembly manual (printer is already assembled)
Substantial documentation on using slicers
Supplies : PLA filament (color of your choice) 100g
Painter's tape
Please call me @ 9363-6366. Thanks for viewing.
An intermediate level 3D printer, for entry level users wanting to learn and understand the hardware and software functions of 3D Printing. The printer is fully assembled and operational, and has been lightly used for testing and calibration purpose only.
I can demonstrate the printer in operation, and could provide some hours of advice and information as to using the printer, software, and various software functions. The printer can also be shown with the uses of 3D softwares.
Model : Delta 3DP Customs
State : Fully assembled, fully operational, working to spec
Print plate size : 200 diameter, glass bed
Build platform : 200mm by 200mm by 250
Filament size : 1.75mm
Single extruder : 0.4mm
Material capabilities : ABS, PLA, and others
Type : Delta, open frame
Layer resolution : 100 microns
Placement accuracy : 5 microns
Printing modes : Solid, honeycomb, hollow
Extruder temperature range : 170C to 250C verified
Connection : USB 2.0 or higher
Power : 110V/220V AC
Auto bed tramming / leveling
Manufacturer supplied software : Easyprint, RepRap, Skeinforge and Slic3r slicing software, USB driver
Input file type : STL files
Various free software programs for support use and STL viewing
Operating system : Windows or Linux
Computer requirements : 1.8Ghz or higher, 1GB RAM memory
Documentation : Manufacturer user startup and operating instructions
User assembly manual (printer is already assembled)
Substantial documentation on using slicers
Supplies : PLA filament (color of your choice) 100g
Painter's tape
Please call me @ 9363-6366. Thanks for viewing.