WTS: TRex + 9CHP + Prolux charger (All my heli stuffs)

[PhiBeR]

Hi Guys,

Probably moving away from Helis n R/C flying for awhile
if i can fetch a good price for all my items..
Using the money to buy a AMD Athlon X2 system..
Been too busy with sch n PC stuffs to fly.. 6 mths nvr fly liao.
So better sell than let it rust right? Let someone enjoy flying..

Try to post as much details as i can.. forget most of the details leh..
that shows how long i nvr touch it..

1. TRex Kit - No crashes, fully flyable.
0. Stock TRex 450X kit - $275
a. Futaba GY401 HH Gyro - $250
b. 2 x hs56hb for cyclics - $90
c. 1 x hs55 for servo - $26
d. Align 400LF 2800kv brushless motor - $76
e. Align 25A BL ESC w/ Governor (Brand new, not mounted!) 25A Brushless ESC RCE-BL25G - $76
f. Berg 6 72mhz - Top of the line RX - $140 (us$80+)
g. 1 x Etec 3s 1700mah, less than 30 charges - $70 (forget how much i bought le)
h. 1 x Japan 3s 2500mah (25+ mins hover!) - $90
i. 1 x Prolux 1s to 3s Li-po Charger - $55
j. 1 x 12+Amp PC power supply modded for Prolux - $20
k. 1 x full set (or so) of spares for TRex - $120+
l. 1 x carbon fiber blade - $35
m. 1 x set of extra wood blades - $18
n. 1 x 6ch align 72mhz rx - $35
o. 1 x Seal Lead Acid for field charing - $10
p. 1 x DC Charger for the SLA - $25
q. Misc R/C parts n tools, watever i have - $100+
r. Self-made carry case for T-Rex - $10

Total cost - $1500+++

2. Futaba 9CHP with 72mhz module and carrying case.
a. 9CHP - $495 from SHS
b. Carrying case - $30
c. R/C tools in carrying case, Hex driver, Reamer, etc - $50

Condition of 9CHP is 8/10, juz cosmetic discolorization of the faceplate.
No cracks or wat not.. LCD is scratch free!

Total Cost - $580

Everything total cost me about $2k+

Everything selling for $1400 as a set.. Negotiable..
Will not sell if price is too low..
Drive down to my place at Tampines St 45, take everything!

Frequency is 72.xxx (really forget liao!) and it's MODE 2 tx..
Can change to mode 1 for u on the spot!

Will post picture when i get back tonite..
Please call me at 91111933 to deal!

[PhiBeR]

Willing to sell the TX separately after i've sold the heli and all the parts..

Else wun sell separatly ba.. :P
Coz if no one want to buy my stuffs, i will go back R/C flying..
when i'm free.. also dunno when.. let it sit in my room for abit longer.. hehe..

Take Heli and all the parts/tools/chargers/etc at $1000

Take TX, case and all it's parts at $400

[PhiBeR]

Opps..

I'm so blur!!
Item b. for trex should be
b. 3 x hs56hb for cyclics - $120..

Hahaha.. i thought only got 2 servos..
Should be 3.. 3 infront, 1 for tail.. hahaha..

[PhiBeR]

Opps..

I'm so blur!!
Item b. for trex should be
b. 3 x hs56hb for cyclics - $120..

Hahaha.. i thought only got 2 servos..
Should be 3.. 3 infront, 1 for tail.. hahaha..

Opps forget to add also..

TX comes with Original futaba wall charger, 72mhz module and carrying case.
The case is bought last time during a DH mass order..
Same one as dougs..

Will throw in a 8 x sanyo 2500 nimh pack modified for 9CHP usage..
It comes in a 8 x AA battry holder with 9chp batt plug..
this pack cost $40 to make..

BUT i will not sell the TX until i can sell my Heli stuffs..
Else heli with no TX how?? Wan to fly also cannot.. hehe..

[PhiBeR]

I say already, i WON'T sell my TX unless i can sell off the Heli..
Til now, Heli is NOT SOLD..

[PhiBeR]

Here's the pictures..

Updates：
Tail servo is NOT hs55, it's a Futaba 3108 ($36)..
3 pcs of 3s lipo batteries are included, not 2..
1 x 1700mah, 1 x 2500 mah and 1 x 3200 mah.. i think.. :P

[PhiBeR]

U will get everything u see in the pictures as a set..
Can consider RTF ba..

Everything is in very good condition.
There are about 2 pairs of brand new wooden blades.
3 pairs of used and maybe damaged wooden blades.
1 pair of brand new carbon fiber blade
1 pair of ABS stock blades.
1 pair of new wooden blade (mounted on trex)

There are enough spares for 1 major crash and at least 2 minor crash!

TX Comes with wall charger, carrying case, manual, box if u want, original
futaba ni-cd battery, and my DIY sanyo 8 x AA 2500mah nimh batteries..

Heli comes with PINK struts n canopy.. hehe.
Also the DIY carrying case u see for the heli..

Cheers!
Everything going for $1.4k Negotiable, cash n carry!

[PhiBeR]

Let me lower my asking price to $1300..

Nice number!

[noordin67]

tx

Let me lower my asking price to $1300..

Nice number!

Hi, I'm only interested in ur futaba tx. Hope u could consider.

[PhiBeR]

Not interested in selling the TX UNTIL my heli is sold..
U're the 5th guy to ask...

IF i sell the tx, then no one buy my heli..
i'll have to use string to fly my trex!

[PhiBeR]

I'm also NOT selling the TX carrying case separately..
the tx case is AVAILBLE at Sim Lim Tower for $45..
Basement shop, go there and walk around, u will see it..

[PhiBeR]

Hmm.. $1.3k also no takers? Lower abit lor..

For a RTF TRex kit, 3D-flight capable setup!
Comes with 3 sets of li-po batts (ultra deans) and li-po charger.

I can sell all the Trex stuffs at $900
And the TX with case and sanyos at $400..

Or buy all at $1200 (Last price!)
Sigh.. i straight lose $1k.. lolz.. original cost of everything is above $2k

Cheers!

[eleewhm]

very good price.....

like me i stop on PC ..go to heli..

[PhiBeR]

I stopped on PC, went Heli, went slacking..
Now going back to PC..
Coz that's why my ricebowl lies.. :P

Probably will come back RC Heli again in the future..

Yeah.. the price is very tempting..
Considering my heli quite new, only use to hover lor, never even do FF before!
Yes.. i can't do FF..

[noordin67]

I stopped on PC, went Heli, went slacking..
Now going back to PC..
Coz that's why my ricebowl lies.. :P

Probably will come back RC Heli again in the future..

Yeah.. the price is very tempting..
Considering my heli quite new, only use to hover lor, never even do FF before!
Yes.. i can't do FF..

reserve for me if u decide to let ur tx go.