T E A M
WTS - Schulze Chamaleon isl 6-330 d charger
Hi Bros, selling a used but almost new German Schulze Chamaleon isl 6-330 d charger @ $150
Retail about $350++
The Isl 6-330d is a full feature two port charger that charge most batteries on the market today. Fully automatic charge profiles makes for easy learning and fast charging. Charge your Ni-Cd, Nimh, Li-Lo, Limn, Lipo lead acid and gel batteries with ease.
Output (1) Charge & Discharge
- 1-30 (36) cells Ni-Cd
- 1-30 (36) cells Ni-MH
- 1-19 (23) cells Lead-acid, lead-gel
- 1-13 (16) cells Li-MnO
- 1-11 (13) cells Li-Io
- 1-11 (13) cells Li-Po
Output (2)
- 1-6 cells Nickel-Cadmium = 1.2 ... 7.2 V,
- 1-6 cells Nickel-Metallhydrid = 1.2 ... 7.2 V,
- 1-4 cells Lead acid = 2...8 V,
- 1-3 cells Lithium-Mangan-Oxid = 3.0 ... 9.0 V,
- 1-3 cells Lithium-Ion = 3.6 ... 10.8 V,
- 1-3 cells Lithium-Polymer = 3.6 ...
- 10.8 V (identical to the Li-Ion program).
- To charge the maximum rated cell count on output 2 a 13.8 V supply voltage is necessary!
Modes
- Full Automatic
- manual modes
- automatic mode combination programs
- Lead Acid/ Gel cell
Other Features
- charges from 1 cell upward
- discharges from 2 cells Ni-Cd/Ni-MH / 1 cell others - upwards (down to a residual voltage of about 1,3 V)
- selection of a maximum charge quantity possible (safety - cut - off).
- Remembers the set programs you program and you can recall them.
Details @ http://www.rc-direct.com/schulze330.htm
PM me if interested...
Retail about $350++
The Isl 6-330d is a full feature two port charger that charge most batteries on the market today. Fully automatic charge profiles makes for easy learning and fast charging. Charge your Ni-Cd, Nimh, Li-Lo, Limn, Lipo lead acid and gel batteries with ease.
Output (1) Charge & Discharge
- 1-30 (36) cells Ni-Cd
- 1-30 (36) cells Ni-MH
- 1-19 (23) cells Lead-acid, lead-gel
- 1-13 (16) cells Li-MnO
- 1-11 (13) cells Li-Io
- 1-11 (13) cells Li-Po
Output (2)
- 1-6 cells Nickel-Cadmium = 1.2 ... 7.2 V,
- 1-6 cells Nickel-Metallhydrid = 1.2 ... 7.2 V,
- 1-4 cells Lead acid = 2...8 V,
- 1-3 cells Lithium-Mangan-Oxid = 3.0 ... 9.0 V,
- 1-3 cells Lithium-Ion = 3.6 ... 10.8 V,
- 1-3 cells Lithium-Polymer = 3.6 ...
- 10.8 V (identical to the Li-Ion program).
- To charge the maximum rated cell count on output 2 a 13.8 V supply voltage is necessary!
Modes
- Full Automatic
- manual modes
- automatic mode combination programs
- Lead Acid/ Gel cell
Other Features
- charges from 1 cell upward
- discharges from 2 cells Ni-Cd/Ni-MH / 1 cell others - upwards (down to a residual voltage of about 1,3 V)
- selection of a maximum charge quantity possible (safety - cut - off).
- Remembers the set programs you program and you can recall them.
Details @ http://www.rc-direct.com/schulze330.htm
PM me if interested...
Comment