T E A M
Hi all, due to family and other commitments I will have to let go my RTF Honey Bee King 2. This is a used set but it is well maintained and setup for flying. Spares are plenty as listed below and my preference is to sell it together with the bird, for benefits of the new owner.
The bird is mainly stock, except for the following:
1. Telebee Gyro
2. HDS877 digital tail servo
3. Align Trex 450 canopy
Bird is modified at the front to accommodate the battery and for better weight distribution. The main blades plastic wrap is peeled off at the tip but does not affect tracking. Some parts of the body are worn but main components have been changed. Overall condition:
Appearance – 6/10 (you can always replace the parts but it’s not necessary)
Flying – 9/10 (not bad considering that it’s mostly stock)
The following loose spares will be included (mostly new) in the sale of the heli:
1. Bell Control Arm Set x 1
2. Skid Set x 1
3. Horizontal Fin x 1
4. Washout Base x 1
5. Skid Set x 1
6. Bell Control Arm Set x 1
7. Linkage Set x 1
8. Pinion Gear x 2 sets
9. Main Shaft x 1
10. One Way Bearing x 2
11. Rotor Head Control Link Set x 1
The bird will also come with the following:
1. Original box
2. English Manual
3. 2 Batteries (used)
4. Original headlock gyro
5. 2 pcs of Esky servos
6. Original battery charger
7. Stock brushed motor + esc and heat sinks
8. Transmitter (Mode 1)
Price for above - $80 only.
This 3D capable heli is suitable for beginner to advanced level flyer. For newbie, I would suggest you get a set of train skids available at RCE and have an experienced friend to accompany you when we meet up, so that he can witness the condition of the heli. I will, of course, take time to explain to you the parts and different functions of the transmitter and will do a test flight to prove its flight worthiness (no 3D please, as I have not flown for years).
Below are the NIP spare parts (price shown are what I'd paid):
1. Skid Set $8/pc (est.) x 1 = $8
2. Main Frame Set $8/pc x 1 = $8
3. Main Gear Set $10/pc x 2 = $20
4. Tail Rod $5/pc (est.) x 1 = $5
5. Main Shaft $8/pc (est.) x 2 = $16
6. Tail Blade Clamp Set $10.2/pc x 1 = $10.2
7. Rotor Head Control Link Set $5/pc (est.) x 2 = $10
8. Screws/Nuts/Washers $5/pc (est.) x 1 = $5
9. Axis (Feather Shaft) $2.3/pc x 5 = $11.5
10. Vertical Fin Set $6.8/pc x 1 = $8.6
11. Bell Control Arm Set $10/pc x 1 = $10
12. Bearing 5 x 10 x 3mm $8/pc x1 = $8
13. Tail Blade $4.4/pc x 1 = $4.4
14. Washout Base Set $5/pc (est.) x 1 = $5
15. Swashplate Set $8.8/pc x 1 = $8.8
16. One Way Drive Link $6.2/pc x 1 = $6.2
17. Timing Belt Pulley $9.2/pc x 1 = $9.2
18. Main Blade Clamp Set $10/pc (est.) x 1 = $10
19. Main Blades $12.5/pc x 2 = $25
20. Fly Bar $5/pc (est.) x 1 = $5
Total Value above = $193.90
Selling Price for Bird + Spares (loose + NIP) = $168
Self collect at Hillview Avenue. PM to arrange.
Thanks and fly safe. My apologies for the lengthy post.
Pics of Heli:
The bird is mainly stock, except for the following:
1. Telebee Gyro
2. HDS877 digital tail servo
3. Align Trex 450 canopy
Bird is modified at the front to accommodate the battery and for better weight distribution. The main blades plastic wrap is peeled off at the tip but does not affect tracking. Some parts of the body are worn but main components have been changed. Overall condition:
Appearance – 6/10 (you can always replace the parts but it’s not necessary)
Flying – 9/10 (not bad considering that it’s mostly stock)
The following loose spares will be included (mostly new) in the sale of the heli:
1. Bell Control Arm Set x 1
2. Skid Set x 1
3. Horizontal Fin x 1
4. Washout Base x 1
5. Skid Set x 1
6. Bell Control Arm Set x 1
7. Linkage Set x 1
8. Pinion Gear x 2 sets
9. Main Shaft x 1
10. One Way Bearing x 2
11. Rotor Head Control Link Set x 1
The bird will also come with the following:
1. Original box
2. English Manual
3. 2 Batteries (used)
4. Original headlock gyro
5. 2 pcs of Esky servos
6. Original battery charger
7. Stock brushed motor + esc and heat sinks
8. Transmitter (Mode 1)
Price for above - $80 only.
This 3D capable heli is suitable for beginner to advanced level flyer. For newbie, I would suggest you get a set of train skids available at RCE and have an experienced friend to accompany you when we meet up, so that he can witness the condition of the heli. I will, of course, take time to explain to you the parts and different functions of the transmitter and will do a test flight to prove its flight worthiness (no 3D please, as I have not flown for years).
Below are the NIP spare parts (price shown are what I'd paid):
1. Skid Set $8/pc (est.) x 1 = $8
2. Main Frame Set $8/pc x 1 = $8
3. Main Gear Set $10/pc x 2 = $20
4. Tail Rod $5/pc (est.) x 1 = $5
5. Main Shaft $8/pc (est.) x 2 = $16
6. Tail Blade Clamp Set $10.2/pc x 1 = $10.2
7. Rotor Head Control Link Set $5/pc (est.) x 2 = $10
8. Screws/Nuts/Washers $5/pc (est.) x 1 = $5
9. Axis (Feather Shaft) $2.3/pc x 5 = $11.5
10. Vertical Fin Set $6.8/pc x 1 = $8.6
11. Bell Control Arm Set $10/pc x 1 = $10
12. Bearing 5 x 10 x 3mm $8/pc x1 = $8
13. Tail Blade $4.4/pc x 1 = $4.4
14. Washout Base Set $5/pc (est.) x 1 = $5
15. Swashplate Set $8.8/pc x 1 = $8.8
16. One Way Drive Link $6.2/pc x 1 = $6.2
17. Timing Belt Pulley $9.2/pc x 1 = $9.2
18. Main Blade Clamp Set $10/pc (est.) x 1 = $10
19. Main Blades $12.5/pc x 2 = $25
20. Fly Bar $5/pc (est.) x 1 = $5
Total Value above = $193.90
Selling Price for Bird + Spares (loose + NIP) = $168
Self collect at Hillview Avenue. PM to arrange.
Thanks and fly safe. My apologies for the lengthy post.
Pics of Heli:
Comment