WTS: Trex 600 Nitro super Pro

[nexus05]

Well taken care trex nitro pro 600 for sale. Looking for serious offers.

1. Futaba 611 gyro, with futaba 9256 digital servo for tail,
2. YS 50 engine,
3. Align muffler
4. Align metal head and tail.
5. JR 8717 digital servos on cyclics, 8V setup
6. Hyperion DS20GMD servo for throttle
7. Align main blade, align paddles, vblades tail blades
8. Evo 2170mah lipo flight pack,
9. Aerospire Multi-gov governor
10. On-board engine temp monitor
11. Spektrum VR5203 dual output regulator (for tail and throttle servo)
12. Tons of Spares including torque tube and tail gear in casing, landing gear, boom, glow ignitor, starter equipment, spare rx lipo pack, etc.
13. Additional OS-50 Hyper engine included (spare engine is in disassemble state, but can be fixed up to use)

Reason for selling: No time for hobby
Contact: 91876463

[nexus05]

up

[nexus05]

open to offers.

No low ballers pls.

[nexus05]

up

[nexus05]

up

[nexus05]

Looking at $1200

**Spare engine mentioned in the first post is a OS 50 hyper comes with an extra 2 sets of ceramic bearings (front+back) for spares.

Will bundle with 3x9252 servos, dremel set, duralite regulator under this thread

http://www.daddyhobby.com/forum/showthread.php?t=61298

That means u get 3x8717 servos, 3x9252 servos, 1 hyperion throttle servo, 1x9256 tail servo...thats 8 servos for 1 heli..lol..

[nexus05]

9252 servos sold

Heli still available

[nexus05]

price reduced $1000

[nexus05]

up

[nexus05]

up..

will consider to split electronics engine etc..

Pls make your offers..thanks

[nexus05]

ups...pls make offer for individual items below..

0. Trex 600 NSP kit
1. Futaba 611 gyro, with futaba 9256 digital servo for tail,
2. YS 50 engine,
3. Align muffler
4. Align metal head and tail.
5. JR 8717 digital servos on cyclics, 8V setup $
6. Hyperion DS20GMD servo for throttle
7. Align main blade, align paddles, vblades tail blades
8. Evo 2170mah lipo flight pack,
9. Aerospire Multi-gov governor
10. On-board engine temp monitor
11. Spektrum VR5203 dual output regulator (for tail and throttle servo)

[nexus05]

up

ys engine sold.

[nexus05]

1. Futaba 611 gyro, with futaba 9256 digital servo for tail, $320
5. JR 8717 digital servos on cyclics x 3, $330
6. Hyperion DS20GMD servo for throttle $50
8. Evo 2170mah lipo flight pack, $40
9. Aerospire Multi-gov governor $60
10. On-board engine temp monitor $30
11. Spektrum VR5203 dual output regulator (for tail and throttle servo) $40

Hyperion DS20GMD servo specs
Speed 4.8V/6.0V : 0.07 / 0.05 sec - 60 deg


Dynamic Torque 4.8V/6.0V : 1.6kg / 2.0kg

[nexus05]

1. Futaba 611 gyro, with futaba 9256 digital servo for tail, $320
5. JR 8717 digital servos on cyclics x 3, $330
6. Hyperion DS20GMD servo for throttle $50
8. Evo 2170mah lipo flight pack, $40
9. Aerospire Multi-gov governor $60
10. On-board engine temp monitor $30
11. Spektrum VR5203 dual output regulator (for tail and throttle servo) $40

Hyperion DS20GMD servo specs
Speed 4.8V/6.0V : 0.07 / 0.05 sec - 60 deg


Dynamic Torque 4.8V/6.0V : 1.6kg / 2.0kg

Trex 600 Kit is sold for those that are asking

[nexus05]

upz..

1. Futaba 611 gyro, with futaba 9256 digital servo for tail, $320
5. JR 8717 digital servos on cyclics x 3, $330
6. Hyperion DS20GMD servo for throttle $50
8. Evo 2170mah lipo flight pack, $40
9. Aerospire Multi-gov governor $60
10. On-board engine temp monitor $30
11. Spektrum VR5203 dual output regulator (for tail and throttle servo) $40

Hyperion DS20GMD servo specs
Speed 4.8V/6.0V : 0.07 / 0.05 sec - 60 deg


Dynamic Torque 4.8V/6.0V : 1.6kg / 2.0kg