Acromaster, gws mustang and esc for sale

[rayshaw23]

1) Acromaster multiplex kit for sale for $50. No electronics. Condition 6/10. No repairs done except there is a brace used to support the motor mount behind dropped off during flight, however i have replaced it with a customised one. Landing gear mount cracked thus requires belly land. will include whatever hardware that comes together with the acromaster.

2) GWS p-51 mustang for sale for $50. condition 6/10. Requires own receiver, battery and transmitter to fly. 25A hobbywing esc, GS C28-34-08 brushless motor and servos included. The fuselage has broke off cleanly during one crash but have been repaired.

3) Hobbywing 25A esc for sale for $20. Unopened with all the connectors and shrink wrap included.

If u need any photos or questions, please ask here in this thread or PM me. All offers will be considered and if i think its reasonable, i will sell it. Deal at serangoon gardens macdonalds. thank you.

[Touch n Go]

Interested in ur acromaster, sms 97372116. thanks

[rayshaw23]

there have been some questions regarding the motor mount. let me try to explain through pictures. =)

pic 1) how it looks like in the current state. u can see that there is no brace at the rear of the motor mount.

pic 2) i have installed my own customised brace. it is glued down because i use CA the last time and i realise CA is not good between wood and plastic. generous amount epoxy or hot glue is definitely prefered.

pic 3) the brace and the front motor mount in placed. i didnt bother screwing down the front motor mount because the screw is very long. the screw that multiplex provided is too short. i got one that extend to almost all the way down the hole and it hasnt been given me problem since. the 4 screws at the 4 corners is to adjust the motor thrust.

hope it cleared up some doubts.

[rccollect]

Pmed u

Pmed u abt P-51D mustang.

[rayshaw23]

as for the mustang. here are some pictures that i think buyers should know.

pic 1) i have crashed this plane before, and the fuselage broke into 2. epoxy has been used to fix it back. however, there is this piece of foam inside that i cannot find, but i've added 2 pieces of plastic to bridge this gap. and 2 velcros are included to velcro your battery and esc.

pic 2) the control rod is just connected to the control horn by just bending it. no fancy installations. i've flown it with no problems of it coming out. if u want to increase or decrease the throw is also easier, just pull it out and insert into another hole.

[rayshaw23]

forgot to include the pics...

[rayshaw23]

acromaster sold to a nice brother who is also a multiplex fan.

[rayshaw23]

gws mustang sold too!