WTS: Brushless Inrunner & Outrunner; Electrifly Ductfan

[airfield]

Clearing ....too many unused items....will seal the deal if your offer is accepted.

PM me your offer...cheers.

NEW

A. Topband 4800KV Brushless Outrunner for EDF x 2

B. Turnigy 4850KV Brushless Inrunner (dia 20mm) x 2

C. Heat Sink for dia 20mm x 2

USED

D. 4200KV Brushless Inrunner (dia 20mm) with Electrifly (by Greatplanes) 56mm Duct Fan

E. 4300KV Brushless Inrunner (dia 20mm) with Electrifly (by Greatplanes) 56mm Duct Fan

F. ~5000KV Brushless Inrunner (dia 20mm) with 55mm Duct Fan

G. Turnigy 4850KV Brushless Inrunner (dia 20mm)

H. 3900KV Brushless Inrunner (dia 20mm) by GWS x 2

I. 4450KV Brushless Inrunner (dia 24mm) by EMP

J. 900KV Brushless Outrunner (dia 28mm x length 28mm)

K. Heat Sink @20mm

[shoyn]

Hi is your 900kv motor suitable for a cloud fly which runs a 6x4 nitro prop? Then is any of your motor suitable for a f16 with ducted fan 75mm? Do state the price too. Thanks.

[airfield]

Sorry, I cant remember the 900kv spec? Bought it from aerial some time back....

[shoyn]

oh. How much are you selling it for?

[airfield]

S$15/- for the 900kv outrunner

[airfield]

as per request...pic of 900kv outrunner motor.

[14 Blades]

Hi is your 900kv motor suitable for a cloud fly which runs a 6x4 nitro prop?

Bro...

900KV on 6 x 4 propeller???

You need to use at least 10 inch prop..

[shoyn]

Really? Bro can enlighten me on what kv motor can fit what size prop? Then also, what makes an airplane goes faster? Thanks.

[14 Blades]

What plane are you flying?

[14 Blades]

Pai Sei, did not see that you have posted Cloudfly...

PM me...

[airfield]

NEW

A. Topband 4800KV Brushless Outrunner for EDF x 2 (SOLD 1, Left 1)

B. Turnigy 4850KV Brushless Inrunner (dia 20mm) x 2

C. Heat Sink for dia 20mm x 2

USED

D. 4200KV Brushless Inrunner (dia 20mm) with Electrifly (by Greatplanes) 56mm Duct Fan

E. 4300KV Brushless Inrunner (dia 20mm) with Electrifly (by Greatplanes) 56mm Duct Fan

F. ~5000KV Brushless Inrunner (dia 20mm) with 55mm Duct Fan (SOLD)

G. Turnigy 4850KV Brushless Inrunner (dia 20mm)

H. 3900KV Brushless Inrunner (dia 20mm) by GWS x 2

I. 4450KV Brushless Inrunner (dia 24mm) by EMP

J. 900KV Brushless Outrunner (dia 28mm x length 28mm)

K. Heat Sink @20mm

[airfield]

Topband 4800kv outrunner for EDF - both sold

[Babylon5]

Really? Bro can enlighten me on what kv motor can fit what size prop? Then also, what makes an airplane goes faster? Thanks.

Hi shoyn, if I am not mistaken your plane is a pusher that uses short prop around 7 inches most. You need a motor between 1500kv/v to 2700KV/v.
The lower Kv means longer prop larger diameter like 7-6 (7 inches pitch 6 for 1500KV/V motor)and as the motor KV goes you need to use shorter propeller like 5 in or 4 inches size. In addition your lipo expected to be 3S .
Therefore the 900KV motor is not suitable for your plane.

Cheers