T E A M
wts: ready to fly trex 600 nitro pro
Fully blinged up trex nitro pro 600 for sale as a set. Only serious offers will be considered, all parts chosen for the kit were top quality and include:
1. Futaba 611 gyro, with futaba BLS 251 digital servo for tail,
2. OS 50 hyper engine,
3. Hatori muffler,
4. 3x JR 8717 digital servos on cyclics, extremely fast 0.09ms response,
5. Hitec HS5965MG on throttle,
6. V-blades on tail and flybar paddles,
7. V-blade main blades, last I heard are irreplaceable, and extremely sought after,
8. Align regulator,
9. 2x evo 2100mah lipo flight packs,
10. Aerospire Multi-gov, the easiest to use and proven extremely effective, headspeed and overspeed regulator, with programming kit,
12. JR 9 channel receiver,
13. Full graphite body, all stock washers were replaced with flaming red aluminum washers,
14. Spares for common pilot error: torque tube and tail gear in casing, landing gear, boom, all oiled, assembled and ready to pop in at a moment's notice so you'll be back flying in no time. Spare align trex 600 pro swash and Quick UK swash plates also included for added responsiveness.
13. OS-50 Hyper spares included, glow plugs, washers, piston, piston rings,
Assembled with the greatest of care and has had only one careful pilot as its owner. Engine is broken in and optimally tuned, headspeed can be programmed in and swapped on the field to suit your flying needs. Chopper is rarely flown, but has been stored in sealed temperature controlled environment.
Also willing to include in the package, preferably together:
14. JR DXII 9 channel transmitter (mode 2 but can be changed easily to mode 1), already programmed to fly this chopper, headspeed selection, trim already done,
15. Starter equipment, with already assembled great planes field kit for your tools, panel for connection charging glow ignitor, 12 volt field battery is built into assembled article,
Serious offers only please, sms me at 96711312, will provide additional details if required.
Reason for selling, no time for hobby.
Fully blinged up trex nitro pro 600 for sale as a set. Only serious offers will be considered, all parts chosen for the kit were top quality and include:
1. Futaba 611 gyro, with futaba BLS 251 digital servo for tail,
2. OS 50 hyper engine,
3. Hatori muffler,
4. 3x JR 8717 digital servos on cyclics, extremely fast 0.09ms response,
5. Hitec HS5965MG on throttle,
6. V-blades on tail and flybar paddles,
7. V-blade main blades, last I heard are irreplaceable, and extremely sought after,
8. Align regulator,
9. 2x evo 2100mah lipo flight packs,
10. Aerospire Multi-gov, the easiest to use and proven extremely effective, headspeed and overspeed regulator, with programming kit,
12. JR 9 channel receiver,
13. Full graphite body, all stock washers were replaced with flaming red aluminum washers,
14. Spares for common pilot error: torque tube and tail gear in casing, landing gear, boom, all oiled, assembled and ready to pop in at a moment's notice so you'll be back flying in no time. Spare align trex 600 pro swash and Quick UK swash plates also included for added responsiveness.
13. OS-50 Hyper spares included, glow plugs, washers, piston, piston rings,
Assembled with the greatest of care and has had only one careful pilot as its owner. Engine is broken in and optimally tuned, headspeed can be programmed in and swapped on the field to suit your flying needs. Chopper is rarely flown, but has been stored in sealed temperature controlled environment.
Also willing to include in the package, preferably together:
14. JR DXII 9 channel transmitter (mode 2 but can be changed easily to mode 1), already programmed to fly this chopper, headspeed selection, trim already done,
15. Starter equipment, with already assembled great planes field kit for your tools, panel for connection charging glow ignitor, 12 volt field battery is built into assembled article,
Serious offers only please, sms me at 96711312, will provide additional details if required.
Reason for selling, no time for hobby.
Comment