2 X inolab/hotgear hgd250hb digital mini servos HS 81/82/85 sized
Product Information
Powerful digital servo with double ball-bearing and precise netural.
It's the first in same range servos to use double ball bearings for precise output shaft.
Specifications:
• Power : 4.8V ~ 6.0V
• Speed : 0.16s/60°,0.12s/60°
• Torque
4.8V--3.0kg.cm(41.67oz.in)(Dynamic torque: 2.5kg.cm(34.72oz.in))
6.0V--4.0kg.cm(55.56oz.in)(Dynamic torque: 3.0kg.cm(41.67oz.in))
• Size : 30.0X13.0X38.1 (1.18X0.51X1.24in)
• Weight : 18.12g(0.64oz)
It is about the same size as a hs82, very light servos for the specs.
1 pc is new, 1 is slightly used <15 flights
great for planes/Gliders, (500 sized etc)helis,cars, boats etc!
these are more precise(digital), smoother, better centering etc than hs65, hs81, 82 etc
-good quality digital, korean-made servos with local support
-These are DIGITAL servos!
going for $60 for both!!!!!!!!!!!!!!!
3 x Hitec HS-55
Control System: +Pulse Width Control 1500usec Neutral
Operating Speed (4.8V): 0.17 sec/60° at no load
Operating Speed (6.0V): 0.14 sec/60° at no load
Stall Torque (4.8V): 15.27 oz-in. (1.1kg.cm)
Stall Torque (6.0V): 18.05 oz-in. (1.3kg.cm)
Operating Angle: 40° one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.4mA/idle and 150mA no load operating
Current Drain (6.0V): 5.5mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: None, outer case serves as bearing
Gear Type: All Nylon
Connector Wire Length: 6.29" (160mm)
Dimensions: 0.89" x 0.45"x 0.94" (22.8 x 11.6 x 24mm)
Weight: 0.28oz (8g)
1pc is working as normal, 2 pcs need gear replacement, come with some horns etc - $30 for all 3
2 x DYNAM 8.4g Micro Servo
Dimensions: 24mm x 11mm x 24mm
Speed: (4.8V no load) 0.12sec/60 degrees
Torque at 4.8V: 1.5 kg/cm
Temperature: -30 to 60 Degree C
Weight: 8.4 grams
Operating Voltage: 4.0-7.0 Volt
Suitable for Futaba and JR connectors
- $18 for both
Product Information
Powerful digital servo with double ball-bearing and precise netural.
It's the first in same range servos to use double ball bearings for precise output shaft.
Specifications:
• Power : 4.8V ~ 6.0V
• Speed : 0.16s/60°,0.12s/60°
• Torque
4.8V--3.0kg.cm(41.67oz.in)(Dynamic torque: 2.5kg.cm(34.72oz.in))
6.0V--4.0kg.cm(55.56oz.in)(Dynamic torque: 3.0kg.cm(41.67oz.in))
• Size : 30.0X13.0X38.1 (1.18X0.51X1.24in)
• Weight : 18.12g(0.64oz)
It is about the same size as a hs82, very light servos for the specs.
1 pc is new, 1 is slightly used <15 flights
great for planes/Gliders, (500 sized etc)helis,cars, boats etc!
these are more precise(digital), smoother, better centering etc than hs65, hs81, 82 etc
-good quality digital, korean-made servos with local support
-These are DIGITAL servos!
going for $60 for both!!!!!!!!!!!!!!!
3 x Hitec HS-55
Control System: +Pulse Width Control 1500usec Neutral
Operating Speed (4.8V): 0.17 sec/60° at no load
Operating Speed (6.0V): 0.14 sec/60° at no load
Stall Torque (4.8V): 15.27 oz-in. (1.1kg.cm)
Stall Torque (6.0V): 18.05 oz-in. (1.3kg.cm)
Operating Angle: 40° one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.4mA/idle and 150mA no load operating
Current Drain (6.0V): 5.5mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: None, outer case serves as bearing
Gear Type: All Nylon
Connector Wire Length: 6.29" (160mm)
Dimensions: 0.89" x 0.45"x 0.94" (22.8 x 11.6 x 24mm)
Weight: 0.28oz (8g)
1pc is working as normal, 2 pcs need gear replacement, come with some horns etc - $30 for all 3
2 x DYNAM 8.4g Micro Servo
Dimensions: 24mm x 11mm x 24mm
Speed: (4.8V no load) 0.12sec/60 degrees
Torque at 4.8V: 1.5 kg/cm
Temperature: -30 to 60 Degree C
Weight: 8.4 grams
Operating Voltage: 4.0-7.0 Volt
Suitable for Futaba and JR connectors
- $18 for both
Comment