MWTS : Mikado Logo 500 3D VBAR head (almost New)

[JYZoom]

OK...here I go again...this time record sales. Before my duddy jump in, I got my reason why I sell...but my lost your gain.

Less then ONE WEEK OLD.

This Heli only have one flight of 3mins on Sunday, Second flight got due to build error of one thread lock missing, while trying to take off it tip over and broke the main blade (515mm shown in picture) and bend the hollow main shaft. It is now replace with a new Carbon Tech 560mm 3D blade from rotor and also an harden original Mikado main shaft.

Configure : (No motor)
- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy ( with 12T/13T 0.7Mod pinion )
- Carbon tech 560mm blade and carbon tecg 85mm tail blade
- HG-D751MG Digital Ultra Torque * 3
- JR8900G * 1
- CC85HV
- Western Robotics Hercules BEC High Current
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup )

Total cost : S$2150

Looking for $1800 for whole package.
Will break up electronic for sales if heli go.

If you really really really need a VSTBAI to go with it, I can consider it as a total package. Then just drop in a motor and a receiver, and you are ready to go. Just make me an offer.

NOTE: Might Want to Sell.....so low baller, forget it.
But good deal as it is 1.5 flights old.

Jonathan

[JYZoom]

Flybar head.

A few of you asking if I have the lfybar head to go with this heli. I Don;t as I got the Flybarless stock as a kit. But you can get the flybar head, someone from runryder is selling the flybar head now http://www.runryder.com/helicopter/t518738p1/

In order to help those who are looking at this deal I have and need a flybar head.....I will lower my price now to do a qucik sales at $1700.


Will post it on runryder and helifreak to sell it also.

Jonathan

[JYZoom]

Breakdown also to see if sales faster.

All items listed here used only for two flghts except 560mm blade which is 100% new.

- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650 - Super Super deal just for a quick sales

- Carbon tech 560mm blade and carbon tech 85mm tail blade - $90 for both- HG-D751MG Digital Ultra Torque * 3 - $300

- JR8900G * 1 - $150

- CC85HV - $240

- Western Robotics Hercules BEC High Current - $75
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $220 ( Only charged twice )

Jonathan

[JYZoom]

Flybar head

Remember , you can get flybar head here:

http://www.runryder.com/helicopter/t518738p1/

Jonathan

[Adrianli]

That is fast!!!


U msg Chye already???

[JYZoom]

Too many

That is fast!!!


U msg Chye already???

He got too many thing to work on.

[JYZoom]

Thread close

Close....keeping it to fly.
I am sure will post to sell in a couple of months time.

[JYZoom]

Update - For sales

Only 10 flights...picture as shown in latest post with 560mm RotorTech blade.

- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650

- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both

- HG-D751MG Digital Ultra Torque * 3 - $260

- JR8900G * 1 - $150

- CC85HV - $230

- Western Robotics Hercules BEC High Current - $70

- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200 ( Only charged twice )

Jonathan

[JYZoom]

Update - added motor

Only 10 flights...picture as shown in latest post with 560mm RotorTech blade.

- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650

- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both

- HG-D751MG Digital Ultra Torque * 3 - $260

- JR8900G * 1 - $150

- CC85HV - $230

- Western Robotics Hercules BEC High Current - $70

- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200 ( Only charged twice )

- Scorpion 4025-890KV motor - $140 (flown 3 times)

Jonathan

[JYZoom]

Take all at $1600

Take all at $1600 for a quick sales
U only need a flybarless elecrtonic and a receiver to fly.

- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650
- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both
- HG-D751MG Digital Ultra Torque * 3 - $260
- JR8900G * 1 - $150
- CC85HV - $230
- Western Robotics Hercules BEC High Current - $70
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200
- Scorpion 4025-890KV motor - $140 (flown 3 times)

Jonathan

[loderunner]

Take all at $1600 for a quick sales
U only need a flybarless elecrtonic and a receiver to fly.

- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650
- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both
- HG-D751MG Digital Ultra Torque * 3 - $260
- JR8900G * 1 - $150
- CC85HV - $230
- Western Robotics Hercules BEC High Current - $70
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200
- Scorpion 4025-890KV motor - $140 (flown 3 times)

Jonathan

bro, how much with flybarless electronic and without battery and scorpion motor?..

[loderunner]

oopss...thought it was a PM message.....anyway, just pm me your price lah..

[JYZoom]

Still availble.

Still available....
If you want it with VSTABI...let me know.

Jonathan

[JYZoom]

Put out a few packages:-

Components:
- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650
- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both
- HG-D751MG Digital Ultra Torque * 3 - $260
- JR8900G * 1 - $150
- CC85HV - $230
- Western Robotics Hercules BEC High Current - $70
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200
- Scorpion 4025-890KV motor - $140 (flown 3 times)
- VSTABI latest Version 4.0 (only if sold with heli as a package)


Packages:

1) All above including VSTABI flybarless hardware :- S$2300
2) All above except VSTABI, Motor and Lipos :- S$1300
3) All above include VSTABI flybarless hardware except Motor and Lipos :- S$2000

Jonathan

[garyong]

Components:
- Mikado Logo 500 3D with VBAR Head and original Mikado painted canopy and harden main shaft ( with 12T/13T 0.7Mod pinion ) - $650
- Carbon tech 560mm blade and carbon tech 85mm tail blade - $80 for both
- HG-D751MG Digital Ultra Torque * 3 - $260
- JR8900G * 1 - $150
- CC85HV - $230
- Western Robotics Hercules BEC High Current - $70
- Hyperion G3 3300mah 4S Lipos * 2 ( for 8S setup ) - $200
- Scorpion 4025-890KV motor - $140 (flown 3 times)
- VSTABI latest Version 4.0 (only if sold with heli as a package)


Packages:

1) All above including VSTABI flybarless hardware :- S$2300
2) All above except VSTABI, Motor and Lipos :- S$1300
3) All above include VSTABI flybarless hardware except Motor and Lipos :- S$2000

Jonathan

bro interested in your motor call gary 93864508 tks