WTS:UcanDo-3D

[faiunie]

Due to new kit building clearing away U-Can-Do 3D EPP plane. Fuselage hotglued. Installed 4 pieces hitec55 servos and BM2410-9 Bell Outrunner motor on the nose.
ESC and TX,RX NOT INCLUDED.
Crashed before once and repaired.Still flew normally

Manual. sticker and will be giving away each of new 10x47 prop & 90x70 prop from GWS free.

Succesful buyer with all the servo and motor will get the DIY plane, 2 pieces spare HS55 gearing set(1 set used) and 2x spare motor shaft for free.

Buyer qoute
1)the kit alone
or
2)with the servos and motor.
SMS HP 98787424 or PM me ur quotation

[faiunie]

Re:packaged

U-Can-Do 3D kit alone, brushless motor soldered with gold connector(male & female), Lipo 2S 1200mah batt. Including the servo wire extension for elevator,rudder and aileron.
U need 4 pieces servo, esc, RX and TX to make it RTF.

Inclusive manual, sticker, 2x spare motor shaft and each of new 10x47 prop & 90x70 prop from GWS.

All those goin for $85 neg.
HP 98787424

Need clearing fast for new kit.

[faiunie]

Link information about U-can-Do 3D

http://www.rcuniverse.com/magazine/article_display.cfm?article_id=584

[faiunie]

Kit alone

Just the kit alone U-Can-Do 3D goin for $40.
No electronics.
HP 98787424 Fai

[faiunie]

Just the kit alone U-Can-Do 3D goin for $40.
No electronics.
HP 98787424 Fai

SOLD