T E A M
Hi guys i have some unused stuff for sale at rock bottom price.
Item 1: honeybee CP for $50.
description: i Burn the 4 in 1 receiver and tot of 'upgrade' it into separate control. But eventually i have problem to compensate on the tail rotor mix.
Going for sale with working main rotor motor, new direct drive tail rotor. All servos are intacts.
Free gift new a set of blades (cost around 16 dollar), 1 pc of 1100 ma li-ion battery and 2s charger.
Good for beginner that able to get helps and plan to use on your own TX or for spare parts.
Note: no tail rotor blade as i clash it soon after i change to direct drive.
Item 2.: 6 channel TX for $50
description: This TX originally for the Honeybee. Be warn that it has special programing that cater for the ccpm control for the honeybee. It comes with LPT port simulater connector. Able to connect to computer and use on FMS for beginner to try out.
Free gift: a pair of 72 mhz tx and rx xtal.
Item3: Zap 400 for $150
Description: Zap that is fully flyabla. Was my only heli before i bought a ccpm TREX. It comes with 3 servos and tonnes of spare parts like main shaft and tail drive shaft pinion and etc, enough to keep u quite sometime from hobby shops. I try to list down all one by one spare later on when i m free. It has 2 sets of new main rotor blades, a set of original wooden blades and a set of carbon blades. Manual still around I think. No receiver nor gyro.
Free gifts: 3 pieces of assembled RC Mart servos for the collectives. U need a high speed tail servos like hitec 50.
Items 4: RC Mart nt300 gyro for $30
Description: A mechanical gyro thats bought with Zap400.
Item 5: Prolux charger with wall adaptor $50
Description: Bought together from ace hobby for $90. The charge original price is $55 i think and the adaptor $35. Selling because i have since upgraded to T15. Box and manual still intact. Another word it is as good as new. Good for beginner that need to charge up to 3s lipo.
Item 6: High end heli ESC for $100
TMM lipo ESC 2542-3s heli. capable to give a very smooth throttle. It has very high resolution of 1024 and high BEC of 5v with 4A. With 3 progamming mode for ep heli. Governor mode supported. Nominal amphere 25a while max currect 30 a for 5 secs.
Bought for $165 from singahobby 8 months ago. Got receive to prove. Manual
and original packaging still intact. Selling as i have another high end esc for my Trex.
Free gift: A bit faulty outrunner blushless 400DH motor. U need to resoilder the connector to solve the problem.
All sale termed sale as it is. plase take note.
Price can be slightly neg if u purchase in bundle. I have no transport hence all items are self collect.
Cheers and keep flying.
Item 1: honeybee CP for $50.
description: i Burn the 4 in 1 receiver and tot of 'upgrade' it into separate control. But eventually i have problem to compensate on the tail rotor mix.
Going for sale with working main rotor motor, new direct drive tail rotor. All servos are intacts.
Free gift new a set of blades (cost around 16 dollar), 1 pc of 1100 ma li-ion battery and 2s charger.
Good for beginner that able to get helps and plan to use on your own TX or for spare parts.
Note: no tail rotor blade as i clash it soon after i change to direct drive.
Item 2.: 6 channel TX for $50
description: This TX originally for the Honeybee. Be warn that it has special programing that cater for the ccpm control for the honeybee. It comes with LPT port simulater connector. Able to connect to computer and use on FMS for beginner to try out.
Free gift: a pair of 72 mhz tx and rx xtal.
Item3: Zap 400 for $150
Description: Zap that is fully flyabla. Was my only heli before i bought a ccpm TREX. It comes with 3 servos and tonnes of spare parts like main shaft and tail drive shaft pinion and etc, enough to keep u quite sometime from hobby shops. I try to list down all one by one spare later on when i m free. It has 2 sets of new main rotor blades, a set of original wooden blades and a set of carbon blades. Manual still around I think. No receiver nor gyro.
Free gifts: 3 pieces of assembled RC Mart servos for the collectives. U need a high speed tail servos like hitec 50.
Items 4: RC Mart nt300 gyro for $30
Description: A mechanical gyro thats bought with Zap400.
Item 5: Prolux charger with wall adaptor $50
Description: Bought together from ace hobby for $90. The charge original price is $55 i think and the adaptor $35. Selling because i have since upgraded to T15. Box and manual still intact. Another word it is as good as new. Good for beginner that need to charge up to 3s lipo.
Item 6: High end heli ESC for $100
TMM lipo ESC 2542-3s heli. capable to give a very smooth throttle. It has very high resolution of 1024 and high BEC of 5v with 4A. With 3 progamming mode for ep heli. Governor mode supported. Nominal amphere 25a while max currect 30 a for 5 secs.
Bought for $165 from singahobby 8 months ago. Got receive to prove. Manual
and original packaging still intact. Selling as i have another high end esc for my Trex.
Free gift: A bit faulty outrunner blushless 400DH motor. U need to resoilder the connector to solve the problem.
All sale termed sale as it is. plase take note.
Price can be slightly neg if u purchase in bundle. I have no transport hence all items are self collect.
Cheers and keep flying.
Comment