T E A M
Hi PA Lovers,
Selling off 2 of my high performance precision 3D flying machine. Meticulously built (Has built 6 PA planes so far) and fulfil all primary PA recommended specifications. Addiction Planes flies on rails and hovers easily due to its amazing power to weight ratio 3 to 1. It also takes off real easy on grass due to its extreme light weightiness and easy to hand launch.Can do flight demo on request. Both planes only 1 flight. Maidened and kept now clearing for space. If you have your Futaba TJ8 I can beam you the settings as it can been calibrated for optimum 3D flying.
Plane followed faithfully all recomended PA setup specs as close as possible.
Addiction X (Green)
Thrust 40 motor brushless outrunner
Carbon Spinner w/aluminium plate
Quantum ESC 45 amp
PA VOX T40X Wooden Prop
CNC aluminium prop adapter
4 x Hitec Digital Servos HS-5245MG (Costs $160 each)
Optional CF servo arms purchased
Optional CF Vortex Generators purchased installed
Upgraded size landing wheels
Upgraded NTC Rear Tail Wheels for hard landings
Deflection gauge
Manual, Decal
Condition 10/10.
Spare Vox T40X Prop
Spare motor Cage
Spare CF Main Wing Shaft
Spare CF Main Landing Gear X 3
Spare Tail Wheel
Other Plane Parts included!
You need to add your RX and lipo to fly (standard 3s 2200 mah)
Note: Just buying a brand new airframe w/motor, esc alone costs $630 at Singapore Hobby
More Details here:
Addiction XL (Green)
Thrust 50 motor brushless outrunner
Carbon Spinner w/aluminium plate
ESC
PA Vox 15x8 Wooden Prop
CNC aluminium prop adapter
4 x Hitec Digital Servos HS-5245MG (Costs $160 each)
Optional CF servo arms purchased
Optional CF Vortex Generators purchased installed
Upgraded NTC Rear Tail Wheels for hard landings
Deflection gauge
Manual, Box, Decal
Condition 10/10.
Spare Big Wheels From SingaHobby
Spare CF Main Landing Gear
You need to add your RX and lipo to fly (standard 2x 3s 2200 mah or 1x6s 2200mah)
Note: Just buying a brand new airframe alone costs $441.18 at Singapore Hobby
More Details here:
Take both planes for $1,150. My cost spent well over $2k. Prefer not to split sale unless considerable offer is made for a single plane.
Hence to sweeten the deal if buyer takes bundle deal:
1) Gorgeous Light Weight Scale Pilot
2) PA original prop adapter Remover
3 Turnigy Covering Film Iron
4) New in Box 6s 2200mah lipo
4) New spare props, new pull-pull system parts, and other freebies!
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm.
Reach me at 91369814 (SMS only) for any query thanks
Selling off 2 of my high performance precision 3D flying machine. Meticulously built (Has built 6 PA planes so far) and fulfil all primary PA recommended specifications. Addiction Planes flies on rails and hovers easily due to its amazing power to weight ratio 3 to 1. It also takes off real easy on grass due to its extreme light weightiness and easy to hand launch.Can do flight demo on request. Both planes only 1 flight. Maidened and kept now clearing for space. If you have your Futaba TJ8 I can beam you the settings as it can been calibrated for optimum 3D flying.
Plane followed faithfully all recomended PA setup specs as close as possible.
Addiction X (Green)
Thrust 40 motor brushless outrunner
Carbon Spinner w/aluminium plate
Quantum ESC 45 amp
PA VOX T40X Wooden Prop
CNC aluminium prop adapter
4 x Hitec Digital Servos HS-5245MG (Costs $160 each)
Optional CF servo arms purchased
Optional CF Vortex Generators purchased installed
Upgraded size landing wheels
Upgraded NTC Rear Tail Wheels for hard landings
Deflection gauge
Manual, Decal
Condition 10/10.
Spare Vox T40X Prop
Spare motor Cage
Spare CF Main Wing Shaft
Spare CF Main Landing Gear X 3
Spare Tail Wheel
Other Plane Parts included!
You need to add your RX and lipo to fly (standard 3s 2200 mah)
Note: Just buying a brand new airframe w/motor, esc alone costs $630 at Singapore Hobby
More Details here:
Addiction XL (Green)
Thrust 50 motor brushless outrunner
Carbon Spinner w/aluminium plate
ESC
PA Vox 15x8 Wooden Prop
CNC aluminium prop adapter
4 x Hitec Digital Servos HS-5245MG (Costs $160 each)
Optional CF servo arms purchased
Optional CF Vortex Generators purchased installed
Upgraded NTC Rear Tail Wheels for hard landings
Deflection gauge
Manual, Box, Decal
Condition 10/10.
Spare Big Wheels From SingaHobby
Spare CF Main Landing Gear
You need to add your RX and lipo to fly (standard 2x 3s 2200 mah or 1x6s 2200mah)
Note: Just buying a brand new airframe alone costs $441.18 at Singapore Hobby
More Details here:
Take both planes for $1,150. My cost spent well over $2k. Prefer not to split sale unless considerable offer is made for a single plane.
Hence to sweeten the deal if buyer takes bundle deal:
1) Gorgeous Light Weight Scale Pilot
2) PA original prop adapter Remover
3 Turnigy Covering Film Iron
4) New in Box 6s 2200mah lipo
4) New spare props, new pull-pull system parts, and other freebies!
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm.
Reach me at 91369814 (SMS only) for any query thanks
Attached Files
Comment