Hi guys, my hangar is getting overcrowded and some of the planes that I love just need to be sold to make space. These will come with almost everything you need to fly - just provide your own radio / rx and batteries.
1. E-Flite Allusive, condition 8/10. I have had this one for less than 10 flights. Wing got damaged a bit in one landing because it hit one stupid pole sticking out of the ground, but I have repaired it since. Comes with everything you see in the picture.
I fly her on a 4S 1300mAh battery on the 10" prop for about 10m flight time, but you can use a 3S pack and a bigger prop if you like. Connector is XT60.
Kit: US$329 (bought from Amainhobbies when it was this price, shipped to Singapore)
Servos: TGY 306 G digital servos for V-tail, US$23.10 x2
Servos: TGY 777MG digital slim wing servos for ailerons, US$23.95 x2
ESC: Turnigy Plush 40A, US$19.99
Motor: Turnigy GliderDrive SK3 3850 960KV, US$31.72
Total cost for me: about US$475, which is over SGD$600, not including shipping, the props and turbo spinner!
Selling for SGD$400 without rx, SGD$420 with rx. She is essentially brand new with one ding that's been repaired.
2. 3DHobbyShop 72" Extra 330SC, condition 9/10. I have had this one for about 30 or 40 flights, never crashed, never had a bad landing. She is a beautiful and powerful aerobatic plane, definitely not for the faint hearted, and the kit comes with everything you need to set her up as either electric or gas (30-35CC). Let me know if you want to set her up as gas, and I will dig the parts up, as well as the matching covering film I have lying around.
I have her set up for electric, and fly her on 8S 4400mAh (2x 4S 4400mAh in series) for about 6 to 7m flight time. Prop is a 19x10 falcon. Servos are powered directly off 2S batteries, 1x 1000mAh 2S can last you 4-5 flights easy. You can use a 19" or 20" prop on her, but with a 20" prop the motor may take a beating in hard tumbles from the gyroscopic forces on it.
The current connector is a jeti anti-spark so you should be able to use any 5.5mm bullet to give her power, and no more sparks!
Kit: US$439 (bought from 3D Hobby Shop direct, shipped to Singapore, shipping cost me a whopping US$380!!!)
Servos: Savox 2271 (!) all around, this is almost 20kg-cm of torque at a 0.06s/60deg speed!! When I bought them they were fairly expensive, at US$129 x4.
ESC: I don't remember. Some kind of castle HV 120, I think. Not cheap, cost me over US$250, so I'll just use that price.
Motor: Motrolfly DM5320, 300KV motor, US$219.95
I have spare LG and spare props too. This one is really bling-ed up... secraft bolts! Aluminium servo arm extensions! I even re-did the covering scheme on the wings to my liking. I really loved this plane!
Total cost for me: over US$1,800, which is something like SGD$2,500. Doesn't include shipping for the small small things like motor / servos / spare parts.
Given the condition, the components included and the cost it took me to get her together, I am selling for SGD$1,800. No rx sale, sorry, I am keeping this rx (futaba R6208SB).
3. Crashtesthobby Pinata, condition 5/10. My FPV ship of choice, until I got my mini talon. I have had this one for a while, many many crashes, but the crashtesthobby planes just don't die. She flies on a 3S 2200mAh for 11-15m flight time, depending on whether you are stingy on the throttle or not. This one has a SimpleOSD X2 with current sensor and RSSI pre-configured for you. Note: you need to fly with a mobius (not included) to hit the CG correctly.
She comes with an afro mini for flight stabilization, a 600mW immersionRC vtx and FPV camera installed. You'll need an FTDI to program the afro mini but I've done all the tuning so you shouldn't need to.
Not for the fussy buyer. Selling for SGD$60 without rx, SGD$70 with rx (it is a D4R-II).
4. GL Speedy from hobbyking, condition 9.5/10. I build it up... then never flew her! Inside is some random hobbyking servo, 40A plush ESC, NTM3530 1400KV motor and I think an 11" folder. Meant to fly on 3S. Lost interest in this, someone can pick it up for cheap.
Selling her for SGD$50 without rx. No rx sale, sorry.
5. 150% scale giant Polaris water plane, condition 8/10. I built this BIG polaris from plans, meant to fly as an FPV ship. She has a blunt nose and a hole in front (sealed with acrylic) so that you can have water FPV! She flies on 6S (2x 2200mAh 3S in series, ask me about the series adapter, I don't need it and I will throw it in). Flight time around 6-8m depending on your throttle management.
I have carefully made two hatches that prevents water ingress, you just need a bit of tape to hold the rear hatch down; the front one is held down by magnets and will not come off in normal operations. Everything inside is as waterproof as I can make it, I even had an inverted landing and managed to bring her back to shore with the motor half submerged and spinning.
Warning to potential buyers no. 1: she is BIG. 150% scale size is bigger than you think it will be, especially since a polaris is a big delta wing. You need a big boot to carry her around!
Warning no. 2: I am using a wood prop on her. Wood props and water are a no-no, but if you fly carefully it should be fine.
Bonus video of FPV flight: https://www.youtube.com/watch?v=Ufk7RutQqT0
Selling her for SGD$80 without rx. No rx sale, sorry.
How to deal
Please whatsapp or SMS me at 98, two, four, ninety, 10 to deal. Self-collect from my place in the east, or from the Thomson area during lunch or just before/after office hours.
Prices are firm, thanks. The discounted prices here are very generous, I try to give a fair breakdown so that buyers are aware how much everything cost and you don't feel like I'm trying to cheat you or something. Inspections are OK especially for the big ticket items but firm buyers will get priority over you if you just want to come and see.
Thanks for reading!
1. E-Flite Allusive, condition 8/10. I have had this one for less than 10 flights. Wing got damaged a bit in one landing because it hit one stupid pole sticking out of the ground, but I have repaired it since. Comes with everything you see in the picture.
I fly her on a 4S 1300mAh battery on the 10" prop for about 10m flight time, but you can use a 3S pack and a bigger prop if you like. Connector is XT60.
Kit: US$329 (bought from Amainhobbies when it was this price, shipped to Singapore)
Servos: TGY 306 G digital servos for V-tail, US$23.10 x2
Servos: TGY 777MG digital slim wing servos for ailerons, US$23.95 x2
ESC: Turnigy Plush 40A, US$19.99
Motor: Turnigy GliderDrive SK3 3850 960KV, US$31.72
Total cost for me: about US$475, which is over SGD$600, not including shipping, the props and turbo spinner!
Selling for SGD$400 without rx, SGD$420 with rx. She is essentially brand new with one ding that's been repaired.
2. 3DHobbyShop 72" Extra 330SC, condition 9/10. I have had this one for about 30 or 40 flights, never crashed, never had a bad landing. She is a beautiful and powerful aerobatic plane, definitely not for the faint hearted, and the kit comes with everything you need to set her up as either electric or gas (30-35CC). Let me know if you want to set her up as gas, and I will dig the parts up, as well as the matching covering film I have lying around.
I have her set up for electric, and fly her on 8S 4400mAh (2x 4S 4400mAh in series) for about 6 to 7m flight time. Prop is a 19x10 falcon. Servos are powered directly off 2S batteries, 1x 1000mAh 2S can last you 4-5 flights easy. You can use a 19" or 20" prop on her, but with a 20" prop the motor may take a beating in hard tumbles from the gyroscopic forces on it.
The current connector is a jeti anti-spark so you should be able to use any 5.5mm bullet to give her power, and no more sparks!
Kit: US$439 (bought from 3D Hobby Shop direct, shipped to Singapore, shipping cost me a whopping US$380!!!)
Servos: Savox 2271 (!) all around, this is almost 20kg-cm of torque at a 0.06s/60deg speed!! When I bought them they were fairly expensive, at US$129 x4.
ESC: I don't remember. Some kind of castle HV 120, I think. Not cheap, cost me over US$250, so I'll just use that price.
Motor: Motrolfly DM5320, 300KV motor, US$219.95
I have spare LG and spare props too. This one is really bling-ed up... secraft bolts! Aluminium servo arm extensions! I even re-did the covering scheme on the wings to my liking. I really loved this plane!
Total cost for me: over US$1,800, which is something like SGD$2,500. Doesn't include shipping for the small small things like motor / servos / spare parts.
Given the condition, the components included and the cost it took me to get her together, I am selling for SGD$1,800. No rx sale, sorry, I am keeping this rx (futaba R6208SB).
3. Crashtesthobby Pinata, condition 5/10. My FPV ship of choice, until I got my mini talon. I have had this one for a while, many many crashes, but the crashtesthobby planes just don't die. She flies on a 3S 2200mAh for 11-15m flight time, depending on whether you are stingy on the throttle or not. This one has a SimpleOSD X2 with current sensor and RSSI pre-configured for you. Note: you need to fly with a mobius (not included) to hit the CG correctly.
She comes with an afro mini for flight stabilization, a 600mW immersionRC vtx and FPV camera installed. You'll need an FTDI to program the afro mini but I've done all the tuning so you shouldn't need to.
Not for the fussy buyer. Selling for SGD$60 without rx, SGD$70 with rx (it is a D4R-II).
4. GL Speedy from hobbyking, condition 9.5/10. I build it up... then never flew her! Inside is some random hobbyking servo, 40A plush ESC, NTM3530 1400KV motor and I think an 11" folder. Meant to fly on 3S. Lost interest in this, someone can pick it up for cheap.
Selling her for SGD$50 without rx. No rx sale, sorry.
5. 150% scale giant Polaris water plane, condition 8/10. I built this BIG polaris from plans, meant to fly as an FPV ship. She has a blunt nose and a hole in front (sealed with acrylic) so that you can have water FPV! She flies on 6S (2x 2200mAh 3S in series, ask me about the series adapter, I don't need it and I will throw it in). Flight time around 6-8m depending on your throttle management.
I have carefully made two hatches that prevents water ingress, you just need a bit of tape to hold the rear hatch down; the front one is held down by magnets and will not come off in normal operations. Everything inside is as waterproof as I can make it, I even had an inverted landing and managed to bring her back to shore with the motor half submerged and spinning.
Warning to potential buyers no. 1: she is BIG. 150% scale size is bigger than you think it will be, especially since a polaris is a big delta wing. You need a big boot to carry her around!
Warning no. 2: I am using a wood prop on her. Wood props and water are a no-no, but if you fly carefully it should be fine.
Bonus video of FPV flight: https://www.youtube.com/watch?v=Ufk7RutQqT0
Selling her for SGD$80 without rx. No rx sale, sorry.
How to deal
Please whatsapp or SMS me at 98, two, four, ninety, 10 to deal. Self-collect from my place in the east, or from the Thomson area during lunch or just before/after office hours.
Prices are firm, thanks. The discounted prices here are very generous, I try to give a fair breakdown so that buyers are aware how much everything cost and you don't feel like I'm trying to cheat you or something. Inspections are OK especially for the big ticket items but firm buyers will get priority over you if you just want to come and see.
Thanks for reading!
Comment