WTS Glow Modeltech Sukhoi 3D

[beefncake]

Selling Modeltech Sukhoi 3D
Never Crashed Before, Condition: 9/10
All stress points such as engine mount area & LG mount area have been re-inforced. Fuel tank 180cc has been properly cushioned with foam & fitted with OS bubblesless clunk. Drilled Engine mount holes drop-in fit Saito 56, 62, 72 & 82.

Reason for Selling: This is a non-removable wing construction (wing perm glued on fuse), so very troublesome to load in/out car (wingspan: 1.175m x Fuse: 1.245m). Esp mine is a small Chevrolet Aveo hatchback & also once loaded with this plane, no space for other planes. So more suitable for bros with bigger vehicles. Small vehicle bros, pls take note as mentioned above.

Option 1) Plane with Servos & Switch with Integrated External Charge Plug Only @ $150

Option 2) Plane with Servos, Switch with Integrated External Charge Plug, Orange RX Futaba & Turnigy 2300mah NIMH Rx Pack @ $180

Option 3) Fully Bind & Fly With Saito 62A, PM me your Offer, However I prefer to sell w/o engine, as would like to keep engine for future projects.

Servos: 2xHitec HS-485Hb for Rudder/Elevator, 2xHitec HS-545BB for Ailerons, 1xTowerpro SG5010 for throttle. All Hitec servos are new when installed on plane & come with boxes & whole set servo arms/accs.

William
81630086

[Faheem]

will it be underpowered if i use an os.46?

[beefncake]

will it be underpowered if i use an os.46?

depend on what u want, for light 3d & extreme aerobatics, os 46 wud be more than enuf. For ballistic 3d (hover at less than 1/2 throttle & pull out like rocket), os 55ax or saito 82 wud be required. my current saito 62 setup hover at slightly more than 5/8 throttle with apc 13x6 (max rpm 9500), your os 46 (suggest apc 12x4, aprox 13000 rpm) shud make it slightly more powerful.

FYI plane weight with dry 180cc fuel tank w/o engine is aprox 1450g, u add up your engine weight plus 150g for fuel, than refer to this static thrust calculator for a rough idea http://personal.osi.hu/fuzesisz/strc_eng/index.htm