If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Completely assembled and test flown at the factory
Capable of sport flying and 3D aerobatics right out of the box
Includes Spektrum’s DX6i 2.4GHz DSM2 6-channel computer programmable transmitter and factory-installed AR6100e Microlite receiver
DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control
420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance
CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages
1. Aluminum and composite swashplate
2. 420H 3800Kv brushless motor
3. Composite main frame
4. 3S 11.1V 1800mAh 20C Li-Po battery
5. 25-amp helicopter brushless ESC
6. Auto-rotation system
7. Spektrum AR6100e 2.4GHz Microlite receiver
8. G110 micro heading lock gyro
9. DS75 digital Sub-Micro servos
10. CCPM (Cyclic Collective Pitch Mixing) control
11. Thrust bearings and full ball bearings throughout
12. 325mm symmetrical wooden main rotor blades
The Blade 400 3D is the first ready-to-fly mini heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2™ 6-channel programmable aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite receiver.
The Blade 400 3D will give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes out of the box 100% factory built and equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. It’s also big enough that you can fly outdoors in breezier conditions that would ground smaller micro helis. And because it’s flight tested at the factory, no pre-flight setup is required. The Blade 400 3D is ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery.
Comment