New Products in RCS

[stickman]

hi ken

u are century dealer right?

can get this in??

http://www.centuryheli.com/products/...6&prtnm=CN2019

sick and tired of align 0.9 hex wrench and scews.

[RadioControl-Sports]

I could arrange for that in the next Century order, however i am unable to commit a good timeframe yet. There's a couple of orders in line for this one two weeks.

[RadioControl-Sports]

Radio Man, your Outrage 550 parts are here

[RadioControl-Sports]

Deluxe Swashplate Leveler (5mm) Back in Stock

[RadioControl-Sports]

Various Main blades for 450 size helis now available
1) Wood 325mm main blades
2) Wood 335mm main blades
3) Fiberglass 325mm main blades
4) Fiberglass 335mm main blades
5) Carbon 325mm main blades
6) Carbon 335mm main blades

New Carbon 205mm main blades for Trex 250 now available

[JYZoom]

Rave

Deluxe Swashplate Leveler (6mm) Back in Stock

Ken,

So cannot use this for 450 size heli?
I think my Rave is 5mm main shaft.

JOnathan

[RadioControl-Sports]

Most 450 size helis are using 6mm* main shafts

***Correction: 5mm, Not 6

[JYZoom]

interesting

Most 450 size helis are using 6mm main shafts

Interesting ...."5mm Hardened Main Shaft
New Hardened Main Shaft for the Rave 450 "

[JYZoom]

5mm

Ken,

Just check Align website, 450 V2 main shaft is 5mm.
Can you double check that the 6mm swash level work on minit-titan or trex 450. If it does, I want one.

Jonathan

[RadioControl-Sports]

Oops, sorry it's 5mm, my mistake

[Radio man]

Collected my Outrage package from Ken yesterday.
Thank you for your service. Appreciated.

[RadioControl-Sports]

Collected my Outrage package from Ken yesterday.
Thank you for your service. Appreciated.

Thank you

[RadioControl-Sports]

Rays Heli Tech DVDs and Book

TX Theory, Bench Setup, & Flight Trimming (Volumes 1-3) SGD$85.90

VOLUME 1: Transmitter Theory and Setup (1 hr. 43 min.; 47 scenes)
VOLUME 2: Helicopter Bench Setup (1 hr. 7 min.; 26 scenes)
VOLUME 3: Helicopter Flight Trimming (55 min.; 26 scenes)

http://rayshelitech.com/osCommerce/product_info.php?products_id=34

Helicopters 101-1001 (Volumes 4 & 5) SGD$59.90

VOLUME 4: Flight Theory, Engine Break-In, and Tools (1 hr. 13 min.; 21 scenes)
VOLUME 5: Building the Helicopter(1 hr. 42 min.; 26 scenes)

http://rayshelitech.com/osCommerce/product_info.php?products_id=35

Rotor Blade Building & Balancing (Volume 6) SGD$42.90

VOLUME 6: ROTOR BLADE BUILDING & BALANCING (1 hr. 45 min.: 25 scenes)

http://rayshelitech.com/osCommerce/product_info.php?products_id=37

Electric Helicopters and eCCPM (Volumes 7-9) SGD$85.90

VOLUME 7: Electric Theory and Build (1 hr. 28 min.; 21 scenes)
VOLUME 8: Transmitter Theory (1 hr. 45 min.; 50 scenes)
VOLUME 9: Bench Setup and Flying (1 hr. 47 min.; 41 scenes)

http://rayshelitech.com/osCommerce/product_info.php?products_id=38

Shop and Field Companion SGD$85.90

Ray's book, originally entitled "Ray's Complete Helicopter Manual," was initially released in 1986. He was writing the "Hover" column for R/C Modeler magazine, and took a compilation of articles he'd written since 1981 and formed the book. RCM published it as part of their "Anthology" series.

The book went through numerous revisions through the years. There was a second edition of Ray's Complete Helicopter Manual, then a third. In 2001, Ray did an extensive re-write and re-named the book "Ray's Authoritative Helicopter Manual."

In the fall of 2005, Ray's produced his first DVD, Volumes 1-3. One month later, R/C Modeler went out of business. Ray knew the DVD would do a pretty good job of filling in while the book wasn't available. He enjoyed the DVDs so much that he made V4-5, then V6. He planned to have a new edition of the book in the Spring of 2007, but V7-9 of the DVD Series became the priority. With V7-9 completed, his attention turned to the book, which finally came out on May 15, 2008. At 264 pages, the new book has over 20 more pages of additional content, along with an extensive index. In addition to the time-proven material carried forward from the previous book, the new edition features information on eCCPM, electric helicopters, and the new 2.4 GHz radios.

CHAPTER DESCRIPTIONS

SECTION ONE: HELICOPTER THEORY
Chapter 1: A Basic Overview on the Operation of the Helicopter
Chapter 2: Rotor Head and Swashplate Design and Operation
Chapter 3: mCCPM and eCCPM Theory
Chapter 4: Tail Rotor and Gyro Theory
Chapter 5: Features and Theory of the Helicopter Radio
Chapter 6: Servo Torque vs. Speed and Endpoint Theory
Chapter 7: Control Linkage Geometry Theory

SECTION TWO: A HAMMER WON’T DO IT
Chapter 8: Tools for Building the Helicopter
Chapter 9: Field Equipment

SECTION THREE: BUILDING THE HELICOPTER
Chapter 10: Glow Engine Preparation and Break-In
Chapter 11: Engine, Clutch and Drive Train
Chapter 12: Cooling Fans and Shrouds
Chapter 13: Main Rotor Heads and Tail Rotors
Chapter 14: Canopy - Fitting and Finishing
Chapter 15: Li-Po Batteries and Fuel Tanks
Chapter 16: Checking Ball Links and Linkages for Proper Fit
Chapter 17: Radio Installation
Chapter 18: Main Rotor Blade Building
Chapter 19: Main and Tail Rotor Blade Balancing

SECTION FOUR: SETTING UP THE HELICOPTER
Chapter 20: Cyclic Pitch Setup
Chapter 21: Collective Pitch Setup
Chapter 22: Throttle Setup for Glow and Electric
Chapter 23: Tail Rotor and Gyro Setup
Chapter 24: Weight and Balance

SECTION FIVE: FLYING THE HELICOPTER
Chapter 25: Avoiding Crashes
Chapter 26: Area Selection and Training Gear
Chapter 27: Types of Assistance
Chapter 28: Blade Tracking, Initial Pitch and Mixture Adjustments
Chapter 29: Initial Trimming and Basic Hovering Guidelines
Chapter 30: From Hover to Forward Flight
Chapter 31: Autorotations
Chapter 32: Advanced Carburetor Theory
Chapter 33: Pitch and Throttle Curves for Aerobatics
Chapter 34: Learning Basic Aerobatics
Chapter 35: I Crashed!
Chapter 36: Troubleshooting
Chapter 37: Flybarless Helicopters

Back in Stock

[Nazar78]

Rl-53h

Hi Ken,

U have RL-53H or PRO-50H piston ring?

Thanks...

[RadioControl-Sports]

Hi Ken,

U have RL-53H or PRO-50H piston ring?

Thanks...

Yes I have the Pro-50 Piston Ring in stock