If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Wow! Can you land it easily on the runway? I want to bring my A4 and ME262 to PFW but I'm quite hesitant due to the short runway.
Nice planes!
runaway long enough lor....but precision landing required....
the trees at the far end are getting taller.
hence, need to approach slightly higher when landing.
Wow nice plannes. May I know what kit is the lovely ME262 .
B5
the ME262 is running on 3800KV motor with 30A ESC.
good enough to fly, loop and roll. but, somehow cannot get it to fly inverted....probably it is the plane characteristic.
there is another ME262...grey in colour same config.
so, do drop by if you have one...
btw, we normally start flying EDF after 9am at PFW ... not to wake up the late sleepers. but today, we started slightly earlier because the real planes from the airbase started flying around 8 plus...so, we joined in the fun....
the ME262 is running on 3800KV motor with 30A ESC.
good enough to fly, loop and roll. but, somehow cannot get it to fly inverted....probably it is the plane characteristic.
there is another ME262...grey in colour same config.
so, do drop by if you have one...
btw, we normally start flying EDF after 9am at PFW ... not to wake up the late sleepers. but today, we started slightly earlier because the real planes from the airbase started flying around 8 plus...so, we joined in the fun....
cheers!
Great! I can do inverted flight on my ME262 but the speed ain't that fast.
I might drop by too tomorrow..will try how hard it is to land my planes there
Comment